Unit of competency Outline

Date retreived
22/07/2026 9:53 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install timber flooring materials to stairs

Install timber flooring materials to stairs

Unit of competency
National Code
MSFFL3080
State Code
OAJ49
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
03/12/2018
View on TGA
State Implementation and Classification
Approved Date
22/05/2019
Field of Education
040321 - Floor Coverings
Original Release Date
22/05/2019
Nominal Hours
36
Description
This unit describes the skills and knowledge required to prepare, set out, cut and lay timber flooring materials to stairs and steps.This unit applies to flooring technicians installing timber to stairs in accordance with pre-determined work orders.Licensing, legislative or certification requirements may apply to this unit and relevant state/territory and local government agencies should be consulted to determine any necessary certification or licensing for undertaking flooring work. Industry standards and codes of practice within Australia must also be applied. Access to construction sites requires certification of general induction training specified by the National Code of Practice for Induction for Construction Work (ASCC 2007).
Notes
Elements and Performance Criteria
1. Prepare materials for installation
  • 1.1 Identify and follow work health and safety, legislative and organisational requirements
  • 1.2 Correctly identify work requirements and process from review of documentation
  • 1.3 Confirm subfloor suitability for installation consistent with Australian Standards and manufacturer recommendations
  • 1.4 Measure stairway or steps and accurately calculate the required amount flooring materials
  • 1.5 Select adhesives, trims and accessories based on job requirements
  • 1.6 Select tools and equipment and check prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition
  • 1.7 Plan sequence of work, including a starting point, to ensure efficiency and quality of installation
2. Set out materials for installation
  • 2.1 Check timber flooring against work order and acclimatise in accordance with manufacturer recommendations
  • 2.2 Use materials in accordance with safety management requirements
  • 2.3 Establish working lines and starting point
3. Lay out flooring material
  • 3.1 Follow instructions and sequence for laying and fixing
  • 3.2 Lay out materials to meet specifications and minimise waste
  • 3.3 Maximise the aesthetics of the materials, including matching grains and colours
  • 3.4 Check required underlay against specified type, manufacturer recommendations and fittings
  • 3.5 Carry out any remedial work to stairway to ensure finished stairway is consistent with guidelines set out in relevant standards, codes and guidelines
4. Install flooring material
  • 4.1 Cut flooring materials in accordance with workplace procedures
  • 4.2 Install required underlay in accordance with manufacturer recommendations
  • 4.3 Use fixing methods and equipment in accordance with manufacturer recommendations and safety management requirements
  • 4.4 Install flooring materials to specifications to the subfloor in accordance with workplace procedures
  • 4.5 Check finished stairway for flaws in installation and materials and rectify faults
5. Complete housekeeping
  • 5.1 Store and recycle unused materials in accordance with workplace procedures
  • 5.2 Check, clean and store tools and equipment in accordance with workplace procedures
  • 5.3 Clean work area and dispose of rubbish safely
  • 5.4 Accurately complete required workplace documentation
No information
No information
Replaces
State Code National Code Title Type
WI387 MSFFL3030 Cut and install timber flooring materials to stairs Unit of competency
State Code National Code Title Type
BIY1 MSF30822 Certificate III in Flooring Technology Qualification
BED0 MSF30818 Certificate III in Flooring Technology Qualification