Unit of competency Outline

Date retreived
22/07/2026 5:48 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Determine layout for laundry components

Determine layout for laundry components

Unit of competency
National Code
MSFKB4008
State Code
WI571
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
20/06/2014
Field of Education
030113 - Cabinet Making
Original Release Date
20/06/2014
Nominal Hours
50
Description
This unit of competency covers designing and documenting the layout for a laundry, including placement of components, such as cabinets, appliances and required laundry facilities applying design principles to spatial considerations for a laundry. It does not include designing any changes to plumbing, electrical or waterproofing, other than the location of required service.Licensing, legislative or certification requirements may apply to this unit and relevant state/territory and local government agencies should be consulted to determine any necessary certification or licensing for undertaking kitchen and bathroom work. Access to construction sites requires certification of general induction training specified by the National Code of Practice for Induction for Construction Work (ASCC 2007).
Notes
Elements and Performance Criteria
1 Confirm and analyse the laundry design requirements
  • 1.1 Communication is established with the client and information regarding the client needs and expectations is obtained
  • 1.2 Key requirements for laundry are assessed and confirmed and constraints determined
  • 1.3 Project parameters are confirmed
  • 1.4 Site analysis is conducted to assess laundry design requirements and limitations
  • 1.5 Spatial considerations are determined specific to the site and client requirements
2 Examine layout options
  • 2.1 Location of current services are identified
  • 2.2 Components for inclusion in laundry are identified
  • 2.3 Range of layout options and traffic flow implications are examined
  • 2.4 Suitability of layout options for space is analysed and limitations and benefits determined
  • 2.5 Environmental implications of the layout are assessed and options reviewed to ensure maximum energy efficiency is achieved
  • 2.6 Access issues relating the laundry are identified and addressed in layout options
3 Select and specify laundry layout
  • 3.1 Layout options are discussed with client and preferences selected
  • 3.2 Required changes to service outlets and waterproofing are identified
  • 3.3 Regulatory requirements relating to laundries are assessed to determine compliance
  • 3.4 Laundry layout and components are documented with specifications detailed
  • 3.5 Cost estimate is calculated and provided for client
  • 3.6 Proposal is communicated effectively to the client and alterations negotiated and confirmed
No information
No information
Replaced By
State Code National Code Title Type
OAI52 MSFKB4012 Determine layout for laundry components Unit of competency
State Code National Code Title Type
J743 MSF40313 Certificate IV in Design of Kitchens, Bathrooms and Interior Spaces Qualification