Unit of competency Outline

Date retreived
23/07/2026 11:06 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Optimise computer numerically controlled (CNC) operations

Optimise computer numerically controlled (CNC) operations

Unit of competency
National Code
MSFFT5007
State Code
WI468
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
20/06/2014
Field of Education
030717 - Plant And Machine Operations
Original Release Date
20/06/2014
Nominal Hours
60
Description
This unit of competency covers analysing production orders, production histories and machine capabilities and manipulating CNC machine control programs to optimise production performance in the furnishing industry. It requires the integration of process machines that may normally function on a stand-alone basis. No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Identify optimal operating conditions
  • 1.1 The production potential of the components of the system are identified
  • 1.2 Production orders and plans are analysed to identify sustained production requirements
  • 1.3 Integration options are identified and analysed to ascertain the optimal integration model
  • 1.4 Software and programming requirements to attain and sustain optimal integration are identified and recorded
2 Prepare for software installation
  • 2.1 Program format and operational intent are accurately determined and required applications identified
  • 2.2 Specifications are checked for required operating conditions
  • 2.3 Program instructions are checked for compliance with specifications
  • 2.4 Software timers are set to specification, where required
3 Install and integrate automatic process machine control programs
  • 3.1 Appropriate program loading technique is selected
  • 3.2 External loading devices are correctly connected to automatic process machine control systems
  • 3.3 Machine control system is placed in correct operational mode to accept program loading
  • 3.4 Program is downloaded in accordance with manufacturers' recommended procedure and enterprise requirements
  • 3.5 Checks are made during and after downloading to ensure accurate and complete data transfer
  • 3.6 External program loading devices and connections are disconnected from process and machine control system
  • 3.7 Integration protocols and actions are completed
4 Commission automatic process and machine control programs
  • 4.1 Operation of the production system using the programs is observed
  • 4.2 Outputs are checked and measured for compliance with specifications
  • 4.3 External inputs are checked for compliance with specifications according to specified procedures
  • 4.4 Total operation is checked for compliance with specifications where applicable
  • 4.5 Location of program master copy storage is confirmed
No information
No information
Replaced By
State Code National Code Title Type
ODZ63 MSFFDM5002 Coordinate and optimise workplace maintenance programs Unit of competency
State Code National Code Title Type
J731 MSF50313 Diploma of Furniture Design and Technology Qualification