Unit of competency Outline

Date retreived
22/07/2026 3:43 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply general purpose hand skills aboard a commercial vessel

Apply general purpose hand skills aboard a commercial vessel

Unit of competency
National Code
MARN016
State Code
OCX23
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
22/11/2024
View on TGA
State Implementation and Classification
Approved Date
19/05/2021
Field of Education
031705 - Marine Craft Operation
Original Release Date
19/05/2021
Nominal Hours
25
Description
Notes
Elements and Performance Criteria
1 Use and maintain ropes
  • 1.1 Rope types and common areas of use are correctly identified
  • 1.2 Ropes are checked for wear and any damage is reported according to workplace procedures
  • 1.3 Ropes are coiled and stowed correctly
  • 1.4 Knots and hitches are tied neatly and securely, and are used according to their correct application
  • 1.5 Ropes are spliced neatly and securely according to their correct application and rope ends are whipped where instructed, to maintain good condition
2 Operate deck machinery and emergency stops
  • 2.1 Deck machinery is inspected, tested and prepared for operations according to workplace procedures and supervisor instructions
  • 2.2 Operations are carried out safely according to supervisor instructions, workplace procedures and vessel Safety Management System (SMS)
  • 2.3 Emergency stops on motor and machinery are operated in response to an emergency situation according to workplace procedures and supervisor instructions
3 Assist in securing vessel at anchor
  • 3.1 Anchor and equipment are checked and prepared prior to letting go according to workplace procedures and supervisor instructions
  • 3.2 Instructions provided are complied with in relation to quantity of anchor cable run out or recovered
  • 3.3 Control of anchor cable during operations is maintained within safe operating limits at all times
  • 3.4 Anchor and equipment are secured on completion of anchoring operations according to workplace procedures and supervisor instructions
  • 3.5 Anchoring area is kept free of loose ropes, wires and debris at all times
4 Assist in securing and adjusting vessel position during mooring operations
  • 4.1 Mooring lines and associated equipment are handled safely according to workplace procedures and supervisor instructions
  • 4.2 Assistance is provided in implementing mooring plans in accordance with workplace procedures and supervisor instructions
  • 4.3 Mooring area is kept free of loose ropes, wires and debris during mooring operations according to workplace procedures and supervisor instructions
  • 4.4 Tension on ropes is maintained at an appropriate level for the stage and nature of the operation according to supervisor instructions
  • 4.5 Mooring lines are secured according to supervisor instructions and workplace procedures
  • 4.6 Equipment malfunction or problems encountered during operations are promptly reported
5 Assist in securing vessel for sea
  • 5.1 Cargo and cargo handling equipment are checked to ensure they are stowed securely according to workplace procedures and supervisor instructions
  • 5.2 Hatches and openings are checked to ensure they are secured
  • 5.3 Maintenance equipment is stowed securely according to workplace procedures, supervisor and manufacturer instructions
  • 5.4 Assist in checking vessel equipment according to workplace procedures and supervisor instructions
  • 5.5 All mooring lines are stowed securely according to workplace procedures and supervisor instructions
  • 5.6 Assist in stowing the gangway according to workplace procedures and supervisor instructions
6 Assist with task aloft and over vessel side
  • 6.1 Assist in identifying hazards, assessing risks and implementing control measures according to supervisor instructions and workplace procedures
  • 6.2 Assist in preparing area and equipment according to supervisor instructions and workplace procedures
  • 6.3 Required precautions and communications are undertaken when working aloft or over the side
  • 6.4 Tasks are completed safely according to workplace procedures, supervisor instructions and SMS
  • 6.5 Equipment is checked and stored according to workplace procedures
7 Assist with safe refuelling operations
  • 7.1 All personal protective equipment (PPE) is accessed and used according to workplace procedures
  • 7.2 Safety boundary for the refuelling process is established according to workplace procedures and supervisor instructions
  • 7.3 Supervisor instructions are followed to ensure spill prevention systems are correctly deployed
  • 7.4 Supervisor instructions are followed in completing tasks related to the refuelling or fuel transfer process
No information
No information
Replaces
State Code National Code Title Type
OCH01 MARN010 Apply general purpose hand skills aboard a vessel Unit of competency