Test, diagnose and repair marine electronic systems and components

Unit of competency Outline

Date retreived
22/07/2026 9:01 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Unit of competency

National Code
AURE321832A

State Code
D7593

TGA Status
Replaced

DTWD Status
Replaced

Current Release Number
1.00

Current Release Date
21/06/2011

View on TGA

State Implementation and Classification

Approved Date

12/10/2011

Field of Education

030505 - Automotive Electrics And Electronics

Original Release Date

12/10/2011

Nominal Hours

Description

This unit of competency describes the skills and knowledge required to diagnose and repair marine electronic systems and components. It requires the ability to identify and confirm work requirements, prepare for, test, diagnose and repair marine low voltage electronic systems and components and complete work finalisation processes.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Notes

Elements and Performance Criteria

1. Prepare for systems and component repair work

1.1. Confirm nature and scope of work to be carried out
1.2. Locate occupational health and safety (OHS) and workplace environmental and sustainable procedures and practices applicable to the work
1.3. Access and interpret test and repair methods, workshop manuals and manufacturer information
1.4. Check and prepare tools, measuring equipment and materials
1.5. Set up work area

2. Conduct system tests and analyse results

2.1. Develop a diagnosis strategy
2.2. Undertake system tests in accordance with workplace procedures and manufacturer and component supplier specifications
2.3. Compare test results with manufacturer and component supplier specifications to identify compliance or non-compliance
2.4. Document results, including evidence, relevant information and recommendations
2.5. Forward report to persons for action in accordance with workplace procedures
2.6. Finalise repair requirements

3. Dismantle systems and components

3.1. Dismantle electronic system and components in a logical sequence without causing damage
3.2. Clean and arrange components ready for inspection and testing
3.3. Measure and compare components against supplier specifications and tolerances
3.4. Decide repair method in accordance with OHS, environmental and industry regulations, and guidelines and enterprise procedures
3.5. Source parts, as required
3.6. Determine and arrange outsourcing of third-party repair

4. Repair, reassemble and reconnect systems and components

4.1. Perform repair and rebuild operations in accordance with workplace procedures and manufacturer and component supplier specifications and tolerances
4.2. Re-assemble electronic systems and components following manufacturer and component supplier procedures to industry standards
4.3. Test systems for correct and safe operation and make required adjustments and re-test
4.4. Complete workplace documentation and deal with as relevant to repair outcomes

5. Prepare for delivery to customer

5.1. Determine the need for water testing
5.2. Make final inspection to ensure protective features are in place and according to workplace requirements
5.3. Finalise and process work completion documentation, update customer and warranty information and give to appropriate persons as required
5.4. Clean work area, dispose of waste and store tools and equipment in accordance with workplace procedures

No information

Replaced By

State Code	National Code	Title	Type
WF343	AURRTR3003	Test, diagnose and repair marine electronic systems and components	Unit of competency

State Code	National Code	Title	Type
D541	AUR30511	Certificate III in Marine	Qualification