Unit of competency Outline

Date retreived
22/07/2026 12:56 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply gilding to stone

Apply gilding to stone

Unit of competency
National Code
CPCCST3015
State Code
OCP13
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
24/12/2024
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
040309 - Bricklaying And Stonemasonry
Original Release Date
01/06/2021
Nominal Hours
16
Description
This unit specifies the skills and knowledge required to apply gilding to letters, monograms and insignias carved into stone surfaces.This unit applies to stonemasons who work independently or in a team to apply gilding to stonework in a workshop setting, on a new or existing structure. A person working at this level would be expected to take responsibility for organising and completing tasks assigned to them without needing close supervision.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001Prepare to work safely in the construction industrymeets this requirement. No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan and prepare.
  • 1.1 Read, interpret and apply gilding to stone requirements from job instructions, standards and codes.
  • 1.2 Follow relevant information from workplace procedures, workplace safety and environmental documentation.
  • 1.3 Determine job priorities and sequence job tasks in consultation with others on site.
  • 1.4 Identify potential hazards and determine and implement control measures.
  • 1.5 Select and check condition of equipment and tools and report damage or faults to relevant person.
  • 1.6 Check conformity of materials against the job requirements.
2 Apply gilding.
  • 2.1 Select, fit correctly and use personal protective equipment (PPE) appropriate for job.
  • 2.2 Prepare stone surface and pre-cut lettering and shapes to job specifications.
  • 2.3 Mix and apply specific colour to stone surface ensuring size is contained within the lettering or shape.
  • 2.4 Determine potential shrinkage of gilding material and cut gilding accordingly.
  • 2.5 Check sized surface for stickiness and apply gilding material.
  • 2.6 Trim and remove excess gilding at edges of lettering or shape.
  • 2.7 Burnish gilding material and ensure loose particles are removed.
  • 2.8 Select and apply cleaning products and cleaning procedure to surrounding area.
3 Clean up
  • 3.1 Clear the work area, and dispose of, reuse or recycle materials following workplace and environmental requirements.
  • 3.2 Clean tools and equipment, check for serviceability and report damage or faults.
  • 3.3 Store and secure tools and equipment following workplace procedures.
No information
No information
Replaces
State Code National Code Title Type
WI759 CPCCST3015A Apply gilding to stone Unit of competency
State Code National Code Title Type
BGE7 CPC32320 Certificate III in Stonemasonry Qualification