Unit of competency Outline

Date retreived
22/07/2026 10:16 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Inspect welding

Inspect welding

Unit of competency
National Code
AUMATW002
State Code
WH927
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
10/01/2014
View on TGA
State Implementation and Classification
Approved Date
11/03/2014
Field of Education
030711 - Boilermaking And Welding
Original Release Date
11/03/2014
Nominal Hours
30
Description
This unit describes the performance outcomes required to prepare and perform welding inspections using established procedures.It applies to those in an automotive and related manufacturing environment.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Plan and prepare inspections
  • 1.1 Welding requirements and weld specifications are identified from welding standards
  • 1.2 Weld quality requirements for inspection are established and confirmed
  • 1.3 Inspection methods, tools and test equipment are selected and prepared
  • 1.4 Welding test and inspection plan is prepared according to workplace procedures
2. Conduct inspections
  • 2.1 Welding processes are monitored to ensure industry welding standards are met
  • 2.2 Welding is tested according to test equipment workplace procedures
  • 2.3 Weld defects are identified and corrective actions taken
  • 2.4 Weld test results are analysed using test equipment and according to workplace procedures
3. Report findings
  • 3.1 Test results, analysis and recommendations for action are reported according to workplace procedures
  • 3.2 Test result sheets are legibly completed
  • 3.3 Work area is cleaned, and waste materials disposed of, reused or recycled according to workplace procedures
No information
No information
No information
State Code National Code Title Type
J831 AUM40113 Certificate IV in Automotive Manufacturing Qualification