Unit of competency Outline

Date retreived
22/07/2026 8:55 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Perform advanced operation of load shifting equipment

Perform advanced operation of load shifting equipment

Unit of competency
National Code
MEM11021B
State Code
W5477
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
01/12/2005
View on TGA
State Implementation and Classification
Approved Date
18/05/2010
Field of Education
030717 - Plant And Machine Operations
Original Release Date
18/05/2010
Nominal Hours
18
Description
This unit covers determining lifting and loading requirements, working within areas of restricted movement or conditions of restricted visibility, identifying loads that need special care, and operating forklifts in special traffic conditions.
Notes
Elements and Performance Criteria
1. Determine lifting and loading requirements
  • 1.1. Load is identified and checked against safe working load and final position/location and/or relevant specifications or regulations.
  • 1.2. Special handling requirements of load are identified, if applicable.
  • 1.3. Load is lifted correctly and placed in final position/location to achieve specified balance of load.
2. Work in areas of restricted movement or conditions of restricted visibility
  • 2.1. Load is collected and manoeuvred without damage to load or collision with obstacles according to standard operating procedures.
3. Identify and carry loads that require special care
  • 3.1. Loads requiring special care are identified.
  • 3.2. Loads are carried in accordance with special requirements of product according to standard operating procedures and/or regulations.
4. Operate forklifts in special traffic conditions
  • 4.1. Forklifts are operated in areas of heavy traffic.
  • 4.2. Forklifts are operated over difficult or uneven surfaces.
  • 4.3. Forklifts are operated in areas shared with the general public, as required.
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Safe working load
As defined in the manufacturers' specifications for lifting plant or gear
Loads requiring special care
Non-standard load configuration
Fragile loads
Dangerous (volatile, explosive, sensitive)
Raising and lowering personnel on approved work platforms (forklift only)
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be able to operate load shifting equipment in special conditions. Competency in this unit cannot be claimed until all prerequisites have been satisfied.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.
Context of and specific resources for assessment
This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.
This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with operating load shifting equipment in special conditions or other units requiring the exercise of the skills and knowledge covered by this unit.
Method of assessment
Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning should not require language, literacy and numeracy skills beyond those required in this unit. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials.
Guidance information for assessment
Replaced By
State Code National Code Title Type
OAV51 MEM11021 Perform advanced operation of load shifting equipment Unit of competency