Unit of competency Outline

Date retreived
23/07/2026 5:48 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install and test a radio frequency identification system

Install and test a radio frequency identification system

Unit of competency
National Code
ICTTEN418
State Code
AWD33
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/01/2016
View on TGA
State Implementation and Classification
Approved Date
05/07/2016
Field of Education
031309 - Communications Equipment Installation And Maintenance
Original Release Date
05/07/2016
Nominal Hours
45
Description
This unit describes the skills and knowledge required for installation of either a new logistical or security network or upgrade of an existing system.It applies to individuals who integrate new and converging functionalities to information and communications technology (ICT) networks. They are employed by telecommunications and information technology networking provisioning companies specialising in radio frequency identification (RFID) technology.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to install specified RFID system
  • 1.1 Prepare for given work according to relevant legislation, work health and safety (WHS) regulations, codes, and standards
  • 1.2 Arrange site access according to required procedure
  • 1.3 Choose the most suitable RFID system based on specifications and in consultation with appropriate person
  • 1.4 Evaluate options for equipment installation siting and antenna positioning to include effects of electromagnetic interference and shielding
  • 1.5 Investigate causes of interference with RFID systems
  • 1.6 Specify network element requirements for the installation and any training requirements for clients
  • 1.7 Create a deployment plan including down times and advise the user group
  • 1.8 Obtain all components and devices required for the RFID system
2. Install specified RFID system and resolve any faults
  • 2.1 Install interrogators or readers according to given plan
  • 2.2 Install tags and document correct procedures for locating and orienting tags
  • 2.3 Install and undertake network configuration activities using relevant operating system and application upgrades to integrate RFID system into the overall network
  • 2.4 Troubleshoot problems between interrogators or readers, tags and networks, including tuning for optimum performance and rectify any faults
3. Test RFID installation according to specification and standards
  • 3.1 Test system installation according to design specifications and standards including optimum placement of tags, data transmission completeness and record outcomes
  • 3.2 Carry out any changes
  • 3.3 Validate changes or additions against specifications
  • 3.4 Document the test results
4. Complete documentation in compliance with customer requirements and clean worksite
  • 4.1 Complete all documentation for users according to the design and customer requirements
  • 4.2 Complete report and notify client of network status and standards applying to the installation
  • 4.3 Clean up and restore worksite to client’s satisfaction
  • 4.4 Secure sign-off from appropriate person
No information
No information
Replaces
State Code National Code Title Type
D3468 ICTTEN4202A Install and test a radio frequency identification system Unit of competency