Unit of competency Outline

Date retreived
22/07/2026 10:02 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Fabricate advanced structural components for aircraft

Fabricate advanced structural components for aircraft

Unit of competency
National Code
MEASTR0015
State Code
OEG57
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
22/11/2022
View on TGA
State Implementation and Classification
Approved Date
28/03/2023
Field of Education
031503 - Aircraft Maintenance Engineering
Original Release Date
28/03/2023
Nominal Hours
100
Description
This unit describes the skills and knowledge required to apply hand skills and use drawings, specifications and maintenance publications to fabricate advanced structural components involving complex and multiple curves and section shapes from aluminium alloys and steel alloys at various temper during scheduled or unscheduled maintenance. Work may be performed individually or as part of a team.Applications include components for fixed and rotary wing aircraft.The unit is used in workplaces that operate under the airworthiness regulatory systems of the Civil Aviation Safety Authority (CASA) and the Defence Aviation Safety Authority (DASA).Any other relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Interpret specifications and organise materials
  • 1.1 Determine materials requirements using specifications and drawings
  • 1.2 Determine procedure for fabricating component or components to plan equipment use and ensure specifications will be met
  • 1.3 Identify required materials in accordance with specifications
  • 1.4 Organise required materials and equipment in accordance with standard enterprise procedures
2. Prepare material and tooling
  • 2.1 Translate required dimensions to materials in accordance with specifications
  • 2.2 Prepare cutting and forming equipment and adjust to ensure accuracy of fabrication
  • 2.3 Cut materials according to specifications, ensuring wastage is minimised, and maintain identification of surplus material, while observing all relevant work health and safety (WHS) requirements, including the use of material safety data sheets (MSDSs) and items of personal protective equipment (PPE)
  • 2.4 Prepare materials requiring special treatment for appropriate processes
  • 2.5 Perform solution treatment on materials in accordance with approved procedures and specifications
3. Form material
  • 3.1 Manufacture required templates, where required, by forming method
  • 3.2 Design and manufacture press tools as required by selected forming method
  • 3.3 Operate forming equipment to form material in accordance with drawings and specifications
  • 3.4 Perform required hand forming of materials to meet specifications
4. Hand correct fabricated components
  • 4.1 Check components for irregularities and determine correction requirements to meet specifications
  • 4.2 Remove irregularities to meet required dimensions and specifications
5. Inspect components
  • 5.1 Inspect fabricated components to confirm dimensional accuracy and specifications are met
  • 5.2 Use required checking fixtures to ensure requirements are met
  • 5.3 Prepare components requiring special or further treatment for the appropriate processes
  • 5.4 Tag or identify completed components in accordance with enterprise procedures
No information
No information
Replaces
State Code National Code Title Type
AUE97 MEA421 Fabricate advanced structural components for aircraft Unit of competency
State Code National Code Title Type
BIC6 MEA41322 Certificate IV in Aeroskills (Structures) Qualification