Unit of competency Outline
Date retreived
22/07/2026 7:58 AM AWST
22/07/2026 7:58 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Plant trees by hand
Plant trees by hand
Unit of competency
National Code
FPIFGM2203B
FPIFGM2203B
State Code
D5987
D5987
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
04/08/2014
Field of Education
050501 - Forestry Studies
Original Release Date
04/08/2014
Nominal Hours
10
Description
This unit describes the outcomes required to undertake forest planting operations by hand. It includes the selection and planting of suitable tree stock, and the use and maintenance of equipmentGeneral workplace legislative and regulatory requirements apply to this unit; however there are no specific licensing or certification requirements at the time of publicationThis unit replaces FPIFGM2203A Plant trees by hand
Notes
Elements and Performance Criteria
1. Prepare for planting operations
- 1.1. Applicable occupational health and safety (OHS), environmental, legislative and organisational requirements relevant to planting trees by hand are identified and followed
- 1.2. Planting requirements and factors are identified from work order and applied in line with site and quality control requirements
- 1.3. Equipment appropriate to work requirements is selected and checked for operational effectiveness in line with manufacturer recommendations
- 1.4. Potential and existing risks, hazards and site conditions are identified and assessed in line with OHS and environmental requirements
- 1.5. Planting stock is appropriately stored in line with operational requirements
- 1.6. Communication with others is established and maintained in line with OHS requirements
2. Plant forest trees
- 2.1. Plant site is assessed for suitability and prepared in line with tree stock and work order
- 2.2. Tree stock is selected and planted in line with production target, quality, safety and specific job requirements
- 2.3. Work methods and patterns are selected to suit particular operation and make efficient use of equipment and available time and resources
- 2.4. Problems are identified and resolved in line with site procedures and environmental requirements
- 2.5. Equipment is maintained and stored in line with manufacturer recommendations and workplace procedures
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
OHS requirements:
are to be in line with applicable commonwealth, state or territory legislation and regulations, and organisational safety policies and procedures, and may include:
personal protective equipment and clothing
safety equipment
first aid equipment
fire fighting equipment
hazard and risk control
fatigue management
elimination of hazardous materials and substances
safe forest practices, including required actions relating to forest fire
manual handling including shifting, lifting and carrying
Environmental requirements may include:
legislation
organisational policies and procedures
workplace practices
Legislative requirements:
are to be in line with applicable commonwealth, state or territory legislation, regulations, certification requirements and codes of practice, and may include:
award and enterprise agreements
industrial relations
Australian Standards
confidentiality and privacy
OHS
the environment
equal opportunity
anti-discrimination
relevant industry codes of practice
duty of care
Organisational requirements may include:
legal
organisational and site guidelines
policies and procedures relating to own role and responsibility
quality assurance
procedural manuals
quality and continuous improvement processes and standards
OHS, emergency and evacuation procedures
ethical standards
recording and reporting
equipment use, maintenance and storage
environmental management (waste minimisation and disposal, recycling and re-use guidelines)
Planting requirements may include:
planting site and environmental requirements
examining stock sampling
examination and assessment criteria
Factors may include:
planting depth
spacing
root placement
firmed vertical and undamaged
Equipment may include:
spade
planting frame
harness
box seedlings
auger
personal protective equipment
Communication may include:
verbal and non-verbal language
constructive feedback
active listening
questioning to clarify and confirm understanding
use of positive, confident and cooperative language
use of language and concepts appropriate to individual social and cultural differences
control of tone of voice
Assessment may include:
checking for appropriate atmosphere, moisture content and season
appropriate spacing and growth suitability for each tree
Preparation may include:
hole depth
hole width
cultivation
tube planter
planting bag
Planted may include:
minimal handling of tree stock to minimise foliage and root damage
monitoring planting to ensure quality
Problems may include:
equipment faults and malfunctions
unsuitability of stock
common diseases and pests
nutrition deficiencies
communication misunderstandings
environmental issues or damage
production quality
safety
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
OHS requirements:
are to be in line with applicable commonwealth, state or territory legislation and regulations, and organisational safety policies and procedures, and may include:
personal protective equipment and clothing
safety equipment
first aid equipment
fire fighting equipment
hazard and risk control
fatigue management
elimination of hazardous materials and substances
safe forest practices, including required actions relating to forest fire
manual handling including shifting, lifting and carrying
Environmental requirements may include:
legislation
organisational policies and procedures
workplace practices
Legislative requirements:
are to be in line with applicable commonwealth, state or territory legislation, regulations, certification requirements and codes of practice, and may include:
award and enterprise agreements
industrial relations
Australian Standards
confidentiality and privacy
OHS
the environment
equal opportunity
anti-discrimination
relevant industry codes of practice
duty of care
Organisational requirements may include:
legal
organisational and site guidelines
policies and procedures relating to own role and responsibility
quality assurance
procedural manuals
quality and continuous improvement processes and standards
OHS, emergency and evacuation procedures
ethical standards
recording and reporting
equipment use, maintenance and storage
environmental management (waste minimisation and disposal, recycling and re-use guidelines)
Planting requirements may include:
planting site and environmental requirements
examining stock sampling
examination and assessment criteria
Factors may include:
planting depth
spacing
root placement
firmed vertical and undamaged
Equipment may include:
spade
planting frame
harness
box seedlings
auger
personal protective equipment
Communication may include:
verbal and non-verbal language
constructive feedback
active listening
questioning to clarify and confirm understanding
use of positive, confident and cooperative language
use of language and concepts appropriate to individual social and cultural differences
control of tone of voice
Assessment may include:
checking for appropriate atmosphere, moisture content and season
appropriate spacing and growth suitability for each tree
Preparation may include:
hole depth
hole width
cultivation
tube planter
planting bag
Planted may include:
minimal handling of tree stock to minimise foliage and root damage
monitoring planting to ensure quality
Problems may include:
equipment faults and malfunctions
unsuitability of stock
common diseases and pests
nutrition deficiencies
communication misunderstandings
environmental issues or damage
production quality
safety
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be able to provide evidence that they can safely and efficiently plant trees by hand
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competency in this unit must be relevant to, and satisfy, all of the requirements of the elements of this unit and include demonstration of:
following applicable commonwealth, state or territory legislative and regulatory requirements and codes of practice relevant to planting trees by hand
following with organisational policies and procedures relevant to planting trees by hand
planting tree stock by hand with minimal handling while adapting work methods or patterns to suit particular operation
identifying and resolving problems, including potential site or equipment hazards, unsuitable planting stock, pests, disease and nutrition deficiencies
Context of and specific resources for assessment
Competency is to be assessed in the workplace or realistically simulated workplace
Assessment is to occur under standard and authorised work practices, safety requirements and environmental constraints
Assessment of required knowledge, other than confirmatory questions, will usually be conducted in an off-site context
Assessment is to follow relevant regulatory or Australian Standards requirements
The following resources should be made available:
workplace location or simulated workplace
materials and equipment relevant to undertaking work applicable to this unit
specifications and work instructions
Method of assessment
Assessment must satisfy the endorsed Assessment Guidelines of the FPI11 Training Package
Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of required knowledge
Assessment must be by direct observation of tasks, with questioning on required knowledge and it must also reinforce the integration of employability skills
Assessment methods must confirm the ability to access and correctly interpret and apply the required knowledge
Assessment may be applied under project-related conditions (real or simulated) and require evidence of process
Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances
Assessment may be in conjunction with assessment of other units of competency
The assessment environment should not disadvantage the candidate
Assessment practices should take into account any relevant language or cultural issues related to Aboriginality, gender or language backgrounds other than English
Where the participant has a disability, reasonable adjustment may be applied during assessment
Language and literacy demands of the assessment task should not be higher than those of the work role
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be able to provide evidence that they can safely and efficiently plant trees by hand
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competency in this unit must be relevant to, and satisfy, all of the requirements of the elements of this unit and include demonstration of:
following applicable commonwealth, state or territory legislative and regulatory requirements and codes of practice relevant to planting trees by hand
following with organisational policies and procedures relevant to planting trees by hand
planting tree stock by hand with minimal handling while adapting work methods or patterns to suit particular operation
identifying and resolving problems, including potential site or equipment hazards, unsuitable planting stock, pests, disease and nutrition deficiencies
Context of and specific resources for assessment
Competency is to be assessed in the workplace or realistically simulated workplace
Assessment is to occur under standard and authorised work practices, safety requirements and environmental constraints
Assessment of required knowledge, other than confirmatory questions, will usually be conducted in an off-site context
Assessment is to follow relevant regulatory or Australian Standards requirements
The following resources should be made available:
workplace location or simulated workplace
materials and equipment relevant to undertaking work applicable to this unit
specifications and work instructions
Method of assessment
Assessment must satisfy the endorsed Assessment Guidelines of the FPI11 Training Package
Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of required knowledge
Assessment must be by direct observation of tasks, with questioning on required knowledge and it must also reinforce the integration of employability skills
Assessment methods must confirm the ability to access and correctly interpret and apply the required knowledge
Assessment may be applied under project-related conditions (real or simulated) and require evidence of process
Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances
Assessment may be in conjunction with assessment of other units of competency
The assessment environment should not disadvantage the candidate
Assessment practices should take into account any relevant language or cultural issues related to Aboriginality, gender or language backgrounds other than English
Where the participant has a disability, reasonable adjustment may be applied during assessment
Language and literacy demands of the assessment task should not be higher than those of the work role
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| S4649 | FPIFGM2203A | Plant trees by hand | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| AXK86 | FWPFGM2203 | Plant trees by hand | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| J609 | FPI20113 | Certificate II in Forest Growing and Management | Qualification |
| J458 | FPI20111 | Certificate II in Forest Growing and Management | Qualification |