Unit of competency Outline

Date retreived
23/07/2026 5:51 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Program computer-controlled equipment

Program computer-controlled equipment

Unit of competency
National Code
PMBPROD385E
State Code
ODB01
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
18/02/2021
View on TGA
State Implementation and Classification
Approved Date
19/05/2021
Field of Education
030717 - Plant And Machine Operations
Original Release Date
19/05/2021
Nominal Hours
40
Description
This unit describes the skills and knowledge required to program computer-controlled equipment or processes typically used for moving, cutting or joining systems.This unit applies to an experienced technician working alone or as part of a team.The unit principally refers to the programming of generally available automation and quasi-robotic assistance devices for moving, cutting, joining, and pick and place systems.No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Determine operational parameters
  • 1.1 Identify work requirements from engineering drawings and product specifications
  • 1.2 Define basic machine function and tool path geometry requirements to meet job specifications
  • 1.3 Select program elements for machine controller that meet job specifications
2. Write program
  • 2.1 Calculate coordinates for simple tool path or basic machining functions based on job specifications
  • 2.2 Write program in standard code format to meet job specifications
  • 2.3 Produce accurate operation sheets that reflect job specifications
3. Check program
  • 3.1 Operate machine in manual mode to test, prove and adjust program to meet job specifications
  • 3.2 Check component output meets job specifications
  • 3.3 Record program operating audit report according to workplace procedures
4. Anticipate and solve process control variances
  • 4.1 Recognise existing or potential process control variances and their causes
  • 4.2 Determine, prioritise and implement remedial and preventative actions based on identified issues and causes
  • 4.3 Monitor process control variances and corrective actions taken until resolved
  • 4.4 Accurately maintain records and logbooks
No information
No information
Replaces
State Code National Code Title Type
BAI21 PMBPROD385 Program computer controlled equipment Unit of competency
State Code National Code Title Type
BGP1 PMB30121 Certificate III in Polymer Processing Qualification
BGO8 PMB40121 Certificate IV in Polymer Technology Qualification