Unit of competency Outline

Date retreived
22/07/2026 6:16 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Identify requirements for safe tilt-up work

Identify requirements for safe tilt-up work

Unit of competency
National Code
CPCCCM1016
State Code
OAP26
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
17/01/2019
View on TGA
State Implementation and Classification
Approved Date
12/04/2019
Field of Education
061301 - Occupational Health And Safety
Original Release Date
12/04/2019
Nominal Hours
16
Description
This unit of competency specifies the skills and knowledge required to identify requirements for safe tilt-up work within the construction industry. It includes knowledge required for induction of construction workers prior to entering tilt-up workplaces. It applies to workers in the construction industry. It involves working under supervision in a team environment.Licensing requirements may apply to this unit of competency depending on the regulatory requirements of each jurisdiction. Relevant state and territory regulatory authorities should be consulted to confirm these requirements.
Notes
Elements and Performance Criteria
1. Identify tilt-up construction and risk management processes.
  • 1.1 Identify and describe relationships between each stage of the tilt-up construction process and the following stage, and typical faults, problems, hazards and possible effects if design and safety requirements are not met.
  • 1.2 Identify and describe basic principles of risk management and duty-holders responsible.
  • 1.3 Identify and describe minimum requirements for a safe work method statement (SWMS) for each task as outlined in the National Code of Practice for Precast, Tilt-Up and Concrete Elements in Building Construction (the National Code), and the duty-holder responsible for its preparation and compliance.
  • 1.4 Identify and describe minimum requirements for a work plan and/or work health and safety (WHS) management plan for tilt-up construction, as outlined in the National Code.
  • 1.5 Identify available skills training opportunities relevant to own work, role and responsibilities.
2. Identify information relating to safe tilt-up construction.
  • 2.1 Identify and describe regulatory information relevant to own work, role and responsibilities.
  • 2.2 Identify and describe own role and responsibilities and those of others relevant to tilt-up construction.
  • 2.3 Identify and describe general work procedures, documentation, drawings and plans for carrying out the tilt-up construction process relevant to own work, role and responsibilities.
  • 2.4 Identify and describe general safety requirements for equipment and tools used in the tilt-up construction process relevant to own work, role and responsibilities.
3. Identify procedures relating to safe tilt-up construction to maintain own safety and that of others.
  • 3.1 Communicate with others to establish that key safety requirements have been met for preceding stages of tilt-up construction.
  • 3.2 Identify and describe general procedures for responding to, rectifying and reporting faults, problems and hazards relevant to own work, role and responsibilities.
  • 3.3 Identify methods and procedures used to control tilt-up construction hazards, including the content of the work plan and/or WHS management plan and SWMSs relevant to own work, role and responsibilities.
  • 3.4 Identify and describe sequence of tasks and activities relevant to own work, and review adequacy of the associated SWMS by conducting a job safety analysis (JSA).
No information
No information
Replaces
State Code National Code Title Type
WE982 CPCCCM1016A Identify requirements for safe tilt-up work Unit of competency
Replaced By
State Code National Code Title Type
OCQ59 CPCCOM1016 Identify requirements for safe precast and tilt-up work Unit of competency
State Code National Code Title Type
BEG4 CPC30318 Certificate III in Concreting Qualification
BEA6 MSM30318 Certificate III in Manufactured Mineral Products Qualification