Unit of competency Outline

Date retreived
22/07/2026 8:25 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Tune unisons aurally to a beatless condition

Tune unisons aurally to a beatless condition

Unit of competency
National Code
MSFPT3011
State Code
WI609
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
19/06/2014
Field of Education
030199 - Manufacturing Engineering And Technology, N.e.c.
Original Release Date
19/06/2014
Nominal Hours
40
Description
This unit of competency covers tuning unisons aurally so they achieve an even and accurate pitch that may include the use of hammers and stabilisation techniques. It applies in workplace and on-site environments for small to large scale enterprises.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan for tuning unisons aurally
  • 1.1 Work health and safety (WHS) requirements, legislative requirements and workplace practices relevant to tuning unisons are verified and complied with
  • 1.2 Customer requirements are received, analysed and confirmed with appropriate personnel
  • 1.3 Communication with others involved with the work is established and maintained to ensure efficient work flow, coordination, personnel cooperation and safety
  • 1.4 Written instructions are followed
2 Prepare to tune unisons
  • 2.1 Tools and equipment are selected consistent with the needs of the job
  • 2.2 Selected tools and equipment are checked for service ability and safety and any faults repaired and reported according to workplace practices
  • 2.3 Personal protective equipment is correctly fitted and used
3 Set a string
  • 3.1 Correct posture for tuning is demonstrated which minimises fatigue and promotes muscular control.
  • 3.2 The fundamental string is tuned aurally to a pitch standard
  • 3.3 Given an external pitch standard, frequency of one string is matched to that pitch to within ± .5 cent
  • 3.4 Tuned string is stabilised using correct hammer techniques
4 Tune an adjacent string in unison to the fundamental string
  • 4.1 Pitch of unison string is adjusted to fundamental string, employing stabilisation techniques, to a beatless condition
  • 4.2 Remaining strings are tuned according to above process
5 Clean up work area
  • 5.1 All tools, materials and other equipment are checked, cleaned and returned to their appropriate location
  • 5.2 Work area is cleared and waste removed
  • 5.3 Workplace documentation is completed and filed
No information
No information
Replaced By
State Code National Code Title Type
OEL79 MSFPT4009 Tune unisons aurally to a beatless condition Unit of competency
State Code National Code Title Type
J740 MSF31213 Certificate III in Piano Technology Qualification
AB649 MSFSS00001 Piano Tuning Skill Set Skill set