Unit of competency Outline

Date retreived
23/07/2026 12:59 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Produce composites using vacuum bagging

Produce composites using vacuum bagging

Unit of competency
National Code
PMBPROD393E
State Code
ODA51
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
18/02/2021
View on TGA
State Implementation and Classification
Approved Date
19/05/2021
Field of Education
030305 - Materials Engineering
Original Release Date
19/05/2021
Nominal Hours
30
Description
This unit describes the skills and knowledge required to use vacuum bagging processes to produce composites products.This unit applies to an experienced technician working alone or as part of a team.The unit principally refers to the practical skills relating to operating vacuum bagging equipment, as well as the application of composites production knowledge using this equipment to control and optimise production processes. It also refers to how, if performed with care, accuracy and good application, the vacuum bagging process underpins the production processes for structural aerospace products. No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Plan work requirements
  • 1.1 Identify materials required, including additives, from job specifications
  • 1.2 Identify equipment and processes required for production and upstream and downstream operations from job specifications
  • 1.3 Perform pre-operational checks including checking for and controlling hazards
  • 1.4 Identify and check emergency stops, guards and controls
  • 1.5 Identify checks and testing processes required for equipment, materials, quality and production management to meet job specifications
  • 1.6 Identify housekeeping needs to prepare and support production
  • 1.7 Identify waste management strategies to collect excess, discarded or nonconforming materials to be disposed of, recycled or reprocessed according to workplace procedures
2. Perform pre-production tasks
  • 2.1 Verify equipment, raw material and mould requirements against job specifications
  • 2.2 Set production process according to equipment and workplace specifications, and adjust process to optimise output based on selected materials
  • 2.3 Set up and adjust vacuum bagging production line settings according to equipment and job specifications
  • 2.4 Verify materials, resins and fibres are correct against job specifications
  • 2.5 Set up date, batch and materials markings according to workplace procedures
  • 2.6 Undertake other pre-startup checks according to equipment specifications and workplace procedures
3. Operate vacuum bagging process
  • 3.1 Start up and operate composites-forming equipment, and make adjustments to settings to meet job specifications
  • 3.2 Ensure process is operating according to equipment specifications and workplace procedures
  • 3.3 Follow checking and testing process to confirm if output meets job specifications and quality standards, and apply strategies to manage non-conforming outputs
  • 3.4 Maintain continuity of process to support production
  • 3.5 Work efficiently to minimise scrap and trim according to workplace procedures
  • 3.6 Clean, adjust and lubricate equipment according to equipment instructions
4. Shut down machinery
  • 4.1 Determine type of shutdown and process to be followed from equipment instructions and workplace procedures
  • 4.2 Shut down equipment according to equipment instructions and workplace procedures
  • 4.3 Clean equipment efficiently and effectively, using appropriate methods and materials according to equipment instructions
  • 4.4 Put guards, locks and notices in place to prevent inadvertent startup
  • 4.5 Accurately complete relevant documentation
  • 4.6 Clean and clear work area after shutdown in readiness for next startup
5. Anticipate and solve process control variances
  • 5.1 Recognise existing or potential process control variances and their causes
  • 5.2 Determine, prioritise and implement remedial and preventative actions based on identified issues and causes
  • 5.3 Monitor process control variances and corrective actions taken until resolved
  • 5.4 Accurately maintain records and logbooks
No information
No information
Replaces
State Code National Code Title Type
BAI16 PMBPROD393 Produce composites using vacuum bagging Unit of competency
State Code National Code Title Type
BGP1 PMB30121 Certificate III in Polymer Processing Qualification
BGO8 PMB40121 Certificate IV in Polymer Technology Qualification