Unit of competency Outline

Date retreived
23/07/2026 4:48 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Shift a load using manually-operated equipment

Shift a load using manually-operated equipment

Unit of competency
National Code
TLID1002
State Code
AVJ75
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
19/10/2015
View on TGA
State Implementation and Classification
Approved Date
23/02/2016
Field of Education
030717 - Plant And Machine Operations
Original Release Date
23/02/2016
Nominal Hours
20
Description
This unit involves the skills and knowledge required to shift loads using manually-operated mechanical equipment in compliance with the relevant work health and safety (WHS)/occupational health and safety (OHS) regulation within the transport and logistics industry. It includes assessing the risks associated with relocating the load, planning the relocation process, carrying out the relocation with the aid of the equipment in accordance with the plan and refurbishing the equipment and worksite.Work is performed under some supervision generally within a team environment. No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Assess risks associated with relocating load
  • 1.1 Products, goods or materials to be relocated are identified and assessed for the appropriate relocation method
  • 1.2 Storage location is determined
  • 1.3 Routes to be followed are identified
  • 1.4 Points of balance are estimated
  • 1.5 Effect of moving contents, which may be loose, liquid, dangerous or hazardous, are considered
  • 1.6 Risks in potential route/s are considered
  • 1.7 Lifting equipment to minimise potential risks is identified
  • 1.8 Appropriate personal protective equipment is determined and worn
  • 1.9 Tools, load shifting equipment and other materials are selected and checked for serviceability and defects are reported to supervisor
2 Plan load relocation
  • 2.1 Load is examined to determine condition, length, bulk and weight
  • 2.2 Load shifting equipment is selected in accordance with workplace procedures
  • 2.3 Safe procedures for using lifting equipment are identified, including the calculation of safe working load (SWL) and/or working load limit (WLL) for weight of goods to be moved
  • 2.4 Process for relocating load is proposed including predicting and planning for potential difficulties
  • 2.5 Proposed process is checked against relevant code of practice and workplace procedures for compliance
  • 2.6 Lifting equipment and accessories are checked for safe operation in accordance with manufacturer’s instructions and workplace procedures
  • 2.7 Personal protective equipment is selected and worn in accordance with WHS/OHS requirements
3 Relocate load
  • 3.1 Unsafe equipment is reported to appropriate personnel in accordance with workplace procedures
  • 3.2 Load is broken down, where applicable, to allow handling and moving a number of single items to ensure the maximum weight of 500 kg is not exceeded
  • 3.3 Mechanical aids and field machines are constructed, when required, by the approved shifting method, so the load can be shifted in accordance with job instructions
  • 3.4 Safe working limits for lifting equipment are identified and maintained
  • 3.5 Planned process and route are followed using equipment within necessary range of limitations
  • 3.6 Relocated materials are set down without damage to goods, personnel or equipment and are checked for stability
  • 3.7 Relocation is checked to see it meets work requirements and variances are reported
4 Refurbish equipment and worksite
  • 4.1 Site is cleaned and cleared of debris and unwanted material
  • 4.2 Field machines, tools and equipment are cleaned, inspected, serviced, maintained and stored in accordance with standard procedures
  • 4.3 Documentation is completed in accordance with standard procedures
No information
No information
Replaces
State Code National Code Title Type
D5062 TLID1002A Shift a load using manually-operated equipment Unit of competency
Replaced By
State Code National Code Title Type
ODP94 TLID0019 Shift loads using manually-operated equipment Unit of competency