Unit of competency Outline
Information current as of
20/10/2026 3:56 PM AWST
20/10/2026 3:56 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Operate lighterage equipment
Operate lighterage equipment
Unit of competency
National Code
DEFEO215A
DEFEO215A
State Code
AVV26
AVV26
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
Original Release Date
15/03/2012
Nominal Hours
0
Field of Education
030717 - Plant And Machine Operations
Description
This unit covers the competency required to operate an ammunition lighter. It includes the requirement to inspect and maintain the lighter and to communicate with the tug boat operator during towing operations.It does not include the requirement to load or unload the lighter.
General notes
N/A
Elements and Performance Criteria
1. Prepare for lighter operations
- 1.1 Requirements to operate a lighter are identified and confirmed in accordance with standard procedures
- 1.2 Work health and safety (WHS) requirements and recognised safety precautions are applied throughout the operation in accordance with standard procedures
- 1.3 Lighter is inspected for safe operation in accordance with standard procedures
- 1.4 Equipment and stores required for operation are identified, acquired and prepared in accordance with standard procedures
2. Operate the lighter
- 2.1 Lighter is moored and manoeuvred in accordance with operational requirements and standard procedures
- 2.2 Hatches are opened, closed and secured in accordance with work requirements and standard procedures
- 2.3 Load security and protection is established and maintained throughout the operation
- 2.4 Liaison is established and maintained with tow boat operators throughout the towing operation
3. Maintain the lighter
- 3.1 Minor repairs and maintenance are conducted in accordance with work procedures and policy
- 3.2 Bird nets are erected and pulled down in accordance with standard policy and procedures
- 3.3 Lighter is cleaned in accordance with standard policy and procedures
4. Complete housekeeping activities
- 4.1 Equipment and tools are maintained in accordance with standard policy and procedures
- 4.2 All records and documentation are finalised in accordance with standard procedures
The Range Statement relates to the Unit of Competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording in the Performance Criteria is detailed below.
Lighters are:
Commonly a flat bottomed unpowered barge designed to carry cargo that can be loaded or unloaded from ships
Standard procedures may include:
Australian Standards
Job guides, pamphlets and other publications
Manufacturers' handbooks, industry specifications and technical instructions
OH&S regulations
Organisational policies and procedures
Relevant local government by laws
Relevant state/territory or federal legislation
Verbal and/or written orders and job instructions
Lighter inspection may include:
Checking bollards and tie down points for serviceability
Filling firefighting buckets and checking fire extinguishers
Protection may include:
Operation of bilge pumps to avoid wetting
Use of tarpaulins
Minor repairs and maintenance may include:
Patching or replacing of tarpaulins
Bird nets may:
Normally be erected when lighter is moored to a buoy
Lighter cleaning may include:
Use of high pressure water hoses and water pumps
Lighters are:
Commonly a flat bottomed unpowered barge designed to carry cargo that can be loaded or unloaded from ships
Standard procedures may include:
Australian Standards
Job guides, pamphlets and other publications
Manufacturers' handbooks, industry specifications and technical instructions
OH&S regulations
Organisational policies and procedures
Relevant local government by laws
Relevant state/territory or federal legislation
Verbal and/or written orders and job instructions
Lighter inspection may include:
Checking bollards and tie down points for serviceability
Filling firefighting buckets and checking fire extinguishers
Protection may include:
Operation of bilge pumps to avoid wetting
Use of tarpaulins
Minor repairs and maintenance may include:
Patching or replacing of tarpaulins
Bird nets may:
Normally be erected when lighter is moored to a buoy
Lighter cleaning may include:
Use of high pressure water hoses and water pumps
The evidence guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for this Training Package.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessment must confirm the ability to:
apply relevant WHS requirements
apply emergency procedures
move and manoeuvre operating lighter
maintain documentation
Consistency in performance
Competency should be demonstrated over time and in a range of actual or simulated contexts.
Context of and specific resources for assessment
Context of assessment
Competency should be assessed in the workplace or in a simulated work environment, in accordance with all relevant legislation and organisational requirements.
Specific resources for assessment
Access is required to:
lighterage
associated equipment
Method of assessment
In a public safety environment assessment is usually conducted via direct observation in a training environment or in the workplace via subject matter supervision and/or mentoring, which is typically recorded in a competency workbook.
Assessment is completed using appropriately qualified assessors who select the most appropriate method of assessment.
Assessment may occur in an operational environment or in an industry-approved simulated work environment. Forms of assessment that are typically used include:
direct observation
interviewing the candidate
journals and workplace documentation
third party reports from supervisors
written or oral questions
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessment must confirm the ability to:
apply relevant WHS requirements
apply emergency procedures
move and manoeuvre operating lighter
maintain documentation
Consistency in performance
Competency should be demonstrated over time and in a range of actual or simulated contexts.
Context of and specific resources for assessment
Context of assessment
Competency should be assessed in the workplace or in a simulated work environment, in accordance with all relevant legislation and organisational requirements.
Specific resources for assessment
Access is required to:
lighterage
associated equipment
Method of assessment
In a public safety environment assessment is usually conducted via direct observation in a training environment or in the workplace via subject matter supervision and/or mentoring, which is typically recorded in a competency workbook.
Assessment is completed using appropriately qualified assessors who select the most appropriate method of assessment.
Assessment may occur in an operational environment or in an industry-approved simulated work environment. Forms of assessment that are typically used include:
direct observation
interviewing the candidate
journals and workplace documentation
third party reports from supervisors
written or oral questions
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| BBB90 | DEFEXO215 | Operate lighterage equipment | Unit of competency |
