Unit of competency Outline

Date retreived
22/07/2026 3:29 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Implement, monitor, rectify and report on interfaces between electrical and mechanical componentry

Implement, monitor, rectify and report on interfaces between electrical and mechanical componentry

Unit of competency
National Code
RIIRAI510D
State Code
WH631
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
07/12/2014
View on TGA
State Implementation and Classification
Approved Date
29/05/2014
Field of Education
030303 - Mining Engineering
Original Release Date
29/05/2014
Nominal Hours
80
Description
This unit describes a participant’s skills and knowledge required to implement, monitor, rectify and report on interfaces between electrical and mechanical componentry in Coal mining.This unit is appropriate for those working in management or technical specialist rolesNo licensing, legislative or certification requirements apply to this unit at the time of publication
Notes
Elements and Performance Criteria
1. Plan and prepare requirements of electrical and mechanical interface
  • 1.1 Access, interpret and apply electrical and mechanical componentry interface documentation and ensure the work activity is compliant
  • 1.2 Obtain, read, interpret, clarify and confirm work requirements
  • 1.3 Identify and address potential risks, hazards and environmental issues and implement control measures
  • 1.4 Select and wear personal protective equipment appropriate for work activities
  • 1.5 Examine components defect reports
  • 1.6 Inspect components according to site, legislative and manufacturer procedures
  • 1.7 Prepare reports detailing the equipment modifications requirements
2. Plan rectification work on electrical and mechanical interface componentry
  • 2.1 Communicate and coordinate activities with others throughout the work activity
  • 2.2 Use available information from maintenance and test results to ensure accurate problem identification
  • 2.3 Identify componentry faults and causes
  • 2.4 Report fault rectification requirements
  • 2.5 Obtain specialist advice/assistance where required
  • 2.6 Isolate/tag componentry for rectification work
3. Rectify electrical and mechanical interface componentry
  • 3.1 Dismantle componentry parts
  • 3.2 Assess componentry parts for serviceability
  • 3.3 Undertake modifications
  • 3.4 Replace componentry parts
  • 3.5 Test componentry for safe working with proscribed specifications
  • 3.6 Record in writing repaired/modified componentry details
  • 3.7 Notify appropriate personnel of repairs/modifications
No information
No information
No information
State Code National Code Title Type
BFH2 RII40420 Certificate IV in Underground Coal Operations Qualification