Unit of competency Outline

Date retreived
22/07/2026 1:57 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Produce basic soft furnishing accessories

Produce basic soft furnishing accessories

Unit of competency
National Code
MSFSF1001
State Code
WI615
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
19/06/2014
Field of Education
030115 - Furniture Upholstery And Renovation
Original Release Date
19/06/2014
Nominal Hours
80
Description
This unit of competency covers producing basic soft furnishing accessories, such as basic cushions and other decorative items, following the requirements of patterns.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Identify work requirements
  • 1.1 Job requirements are identified from work instructions and patterns
  • 1.2 Work health and safety (WHS) requirements, including ergonomic criteria and personal protection needs, are observed throughout the work
  • 1.3 Pattern is interpreted to determine tool, equipment and material requirements
  • 1.4 Instructions for sequencing of work and particular measurements or adjustments are interpreted
  • 1.5 Work sequence is planned, including quality checkpoints
2 Prepare for work
  • 2.1 Suitable work area is selected for the tasks
  • 2.2 Materials are selected to match customer requirements, suitability for the purpose and work instructions
  • 2.3 Potential hazards are identified from observation of the tools, equipment, materials and workplace reference material
  • 2.4 Required tools, equipment and materials are collected in the work area
3 Complete production
  • 3.1 Soft furnishing accessories are produced following work instructions
  • 3.2 Work is checked against patterns and worksheets at the identified checkpoints
  • 3.3 Non-conformity with the required quality standards is rectified
4 Finalise operations
  • 4.1 Completed work is checked against required quality standards
  • 4.2 Documentation is completed following workplace procedures
  • 4.3 Work area is cleaned, and tools and equipment are returned to storage
  • 4.4 Unused materials are returned to storage and waste and scrap are dealt with following workplace procedures
No information
No information
Replaces
State Code National Code Title Type
W8756 LMFSF1001B Produce basic soft furnishing accessories Unit of competency