Unit of competency Outline

Date retreived
23/07/2026 10:50 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Remove, inspect and refit wheel hubs and associated brake components

Remove, inspect and refit wheel hubs and associated brake components

Unit of competency
National Code
AURTTJ012
State Code
OAK16
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
07/12/2018
View on TGA
State Implementation and Classification
Approved Date
15/03/2019
Field of Education
030503 - Vehicle Mechanics
Original Release Date
15/03/2019
Nominal Hours
20
Description
This unit describes the skills and knowledge required to remove, inspect and refit wheel hubs and associated brake components during the rectification of faults in steering and suspension systems. It involves identifying and confirming work requirements, preparing for the task, removing and refitting the wheel hubs and associated brake components, and completing workplace processes and documentation.This unit applies to those working within the automotive service and repair industry. The hubs and associated brake components include those of light vehicles, four wheel drive vehicles or light commercial vehicles. This unit does not involve servicing or repairing braking systems.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to remove and refit wheel hubs and associated brake components
  • 1.1 Identify job requirements from workplace instructions
  • 1.2 Obtain and interpret wheel hub and braking component removal, refitting and adjustment information
  • 1.3 Identify hazards and environmental issues, assess potential risks and implement control measures in line with workplace policies
  • 1.4 Identify tools, equipment and materials required for the job and examine for serviceability
2. Remove and inspect wheel hubs and associated brake components
  • 2.1 Identify components to be removed and remove according to manufacturer specifications, workplace procedures, workplace health and safety and environmental requirements, and without causing damage to components or systems
  • 2.2 Inspect components according to manufacturer specifications and workplace procedures
  • 2.3 Report inspection findings and make recommendations for necessary repairs or replacements and adjustments according to workplace procedures
3. Refit and adjust wheel hubs and associated brake components
  • 3.1 Obtain and interpret refitting information in order to identify refitting options required for the job
  • 3.2 Fit and adjust wheel hubs and associated brake components according to manufacturer specifications, workplace procedures, workplace health and safety and environmental requirements
  • 3.3 Tighten wheel hub adjustment and wheel nuts according to manufacturer specifications and workplace procedures
4. Complete work processes
  • 4.1 Carry out final inspection to ensure correct assembly and operation, and ensure work meets workplace expectations and vehicle is ready for use
  • 4.2 Clean work area and dispose of or recycle materials according to workplace procedures
  • 4.3 Examine tools and equipment and store according to workplace procedures
  • 4.4 Complete workplace documentation according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
AXA65 AURTTJ002 Remove, inspect and refit wheel hubs and associated brake components Unit of competency