Unit of competency Outline

Date retreived
22/07/2026 3:30 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Maintain and repair facilities associated with remote area essential service operations

Maintain and repair facilities associated with remote area essential service operations

Unit of competency
National Code
UEERE0017
State Code
OCC06
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
2.00
Current Release Date
14/10/2021
View on TGA
State Implementation and Classification
Approved Date
12/07/2021
Field of Education
031311 - Powerline Installation And Maintenance
Original Release Date
12/07/2021
Nominal Hours
108
Description
This unit involves the skills and knowledge required to maintain and repair facilities associated with remote area essential service operations. It includes preparing for, conducting, completing and reporting on maintenance and repair of facilities.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare to maintain and repair facilities
  • 1.1 Work health and safety (WHS)/occupational health and safety (OHS) requirements for a remote are power supply (RAPS) plant are identified and applied in accordance with workplace routines and procedures
  • 1.2 Risks are identified, assessed and control measures applied in accordance with workplace procedures prior to commencing work
  • 1.3 Risks/hazards are identified, assessed, reported to relevant person/s and control measures implemented
  • 1.4 Nature and location of service facilities are obtained from documentation or from relevant person/s to determine the scope of work
  • 1.5 Advice on coordinating work with others and the local community is obtained from relevant person/s and applied
  • 1.6 Sources of materials required for work are identified and accessed in accordance with workplace routines and procedures
  • 1.7 Tools, equipment and testing devices required for work are obtained and checked for correct operation and safety
2 Maintain and repair facilities
  • 2.1 Workplace risk control measures and procedures are applied
  • 2.2 Circuits/machines/plant are isolated in accordance with WHS/OHS requirements and workplace procedures
  • 2.2 Facilities are checked to identify deterioration and damage in accordance with workplace procedures
  • 2.4 Faulty and damaged facilities are repaired in accordance with workplace procedures
  • 2.5 Maintenance and repairs are carried out safely and within the prescribed limits, routines and procedures
  • 2.6 Non-routine events are referred to relevant person/s for directions in accordance with workplace procedures
  • 2.7 Maintenance and repair work is conducted minimising waste of materials, energy, damage to apparatus, circuits, the surrounding environment and services
  • 2.8 Quality checks are conducted in accordance with instructions and workplace procedures
3 Complete maintenance and repair work report
  • 3.1 Workplace risk control measures and procedures are applied
  • 3.2 Worksite is cleaned and made safe in accordance with workplace procedures
  • 3.3 Maintenance issues beyond the scope of work are referred to relevant person/s in accordance with workplace procedures
  • 3.4 Work completed is reported to relevant person/s in accordance with maintenance reporting and workplace procedures
No information
No information