Unit of competency Outline

Date retreived
22/07/2026 10:05 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Collect and interpret information to support production processes

Collect and interpret information to support production processes

Unit of competency
National Code
MSFFDM4002
State Code
ODZ64
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
03/06/2022
View on TGA
State Implementation and Classification
Approved Date
15/11/2022
Field of Education
030101 - Manufacturing Engineering
Original Release Date
15/11/2022
Nominal Hours
70
Description
This unit describes the skills and knowledge required to collect and apply statistical and other information to support the development and organisation of production processes in a furniture or similar operation.This units applies to individuals working in a manufacturing environment who use information to analyse production processes, either alone or as part of an internal or external team.No licensing or certification requirements apply to this unit at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Collect information
  • 1.1 Identify existing and potential sources of statistical information in workplace, relevant to process being developed or managed
  • 1.2 Establish statistical requirements of workplace, and any regulatory requirements, and set method of data collection to meet requirements
  • 1.3 Apply mathematical and quality-checking processes to manage statistical information
2. Analyse job requirements
  • 2.1 Read and interpret job specifications and production processes to identify required steps and stages in process, and clarify specifications to confirm understanding
  • 2.2 Read and interpret job specifications and production processes to identify potential points of application of statistical data
  • 2.3 Assess equipment capabilities in terms of meeting job specifications
  • 2.4 Compare workplace production plans, including run time and quantities, with capabilities.
  • 2.5 Apply and report on statistical information to identify potential points of process improvement in production
3. Complete preparatory activities
  • 3.1 Use collected information to inform proposed modifications or adaptations of equipment to ensure achievement of job requirements
  • 3.2 List requirements for tooling or dies as required in accordance with job specifications
  • 3.3 Communicate raw material requirements to appropriate personnel in accordance with workplace procedures
4. Develop and implement operational plans
  • 4.1 Develop operational work plans, including timeframes and milestones, in accordance with workplace procedures
  • 4.2 Organise production operations based on understanding of requirements and information collected to ensure optimum use of resources
  • 4.3 Record and amend operational plans in accordance with workplace procedures and industry practice
5. Conduct trials to monitor equipment operation and product quality
  • 5.1 Set up equipment to make appropriate use of guards, warning devices and safety features, and modify standard operating procedures to suit production process
  • 5.2 Monitor equipment operations to ensure variations or inconsistencies in output are identified, reported and rectified
  • 5.3 Adjust equipment controls and settings to ensure consistency and continuity of production
  • 5.4 Plan and document equipment maintenance, set-up and close-down procedures to support production process
  • 5.5 Inspect product quality and compare with requirements
  • 5.6 Modify the process where required to improve product quality
  • 5.7 Record and report on any non-conformity in product output and investigate possible causes
6. Evaluate production process
  • 6.1 Gather, prepare and process productivity information and other data reports in accordance with workplace procedures
  • 6.2 Check and report on all procedures for process and conformity with trial outcomes
  • 6.3 Note reasons for both positive and negative outcomes as per requirements
  • 6.4 Analyse outcomes for trends or patterns that can be used to optimise workplace operations
  • 6.5 Gain authorisation for ongoing work procedures from appropriate personnel for implementation, and negotiate required changes
  • 6.6 Recommend variations to design specifications based on trial outcomes
No information
No information
Replaces
State Code National Code Title Type
WI457 MSFFT4008 Interpret and use workplace information Unit of competency
WI452 MSFFT4003 Organise production processes Unit of competency