Unit of competency Outline

Date retreived
22/07/2026 4:19 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Use and maintain tools and equipment

Use and maintain tools and equipment

Unit of competency
National Code
AUMATK001
State Code
WH909
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
10/01/2014
View on TGA
State Implementation and Classification
Approved Date
11/03/2014
Field of Education
030717 - Plant And Machine Operations
Original Release Date
11/03/2014
Nominal Hours
15
Description
This unit describes the performance outcomes required to select and use tools and equipment to complete tasks under direct supervision in an automotive environment. It also involves undertaking their basic maintenance and reporting any faults.It applies to those in an automotive environment and involves the application of skills and knowledge at secondary school level or above, and under direct supervision.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Select tools and equipment
  • 1.1 Workplace procedures relevant to the use of tools and equipment are identified and applied
  • 1.2 Work instructions are identified and clarified
  • 1.3 Appropriate tools and equipment are selected as required by work instructions
2. Use tools and operate equipment
  • 2.1 Tools and equipment are checked to ensure they are correct and safe to use according toworkplace procedures, and any identified faults are reported
  • 2.2 Tools and equipment are used according to WHS requirements, manufacturer instructions and workplace procedures
3. Maintain tools and equipment
  • 3.1 Basic maintenance of tools and equipment is carried out according tomanufacturer specifications and workplace procedures
  • 3.2 Tool and equipment maintenance records are completed
4. Complete work processes
  • 4.1 Tools and equipment are shut down and stored according to workplace procedures
  • 4.2 Work area is cleaned according to workplace procedures
No information
No information
No information
State Code National Code Title Type
J826 AUM10113 Certificate I in Automotive Manufacturing Qualification