Unit of competency Outline

Date retreived
22/07/2026 7:05 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Operate a griddle production process

Operate a griddle production process

Unit of competency
National Code
FBPPBK2006
State Code
BBH41
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
23/01/2018
View on TGA
State Implementation and Classification
Approved Date
27/07/2018
Field of Education
030717 - Plant And Machine Operations
Original Release Date
27/07/2018
Nominal Hours
40
Description
This unit of competency describes the skills and knowledge required to set up, operate, adjust and shut down a griddle production process.This unit applies to individuals who work in a production baking environment under general supervision with some accountability for their own work. This includes identifying and providing solutions to a limited range of predictable problems relating to the operation and monitoring of a griddle production process.All work must be carried out to comply with workplace procedures, in accordance with State/Territory work health and safety, and food safety regulations, legislation and standards that apply to the workplace.No occupational licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare the griddle product manufacturing equipment and process for operation
  • 1.1 Read or listen to work instructions from supervisor and clarify where needed
  • 1.2 Identify work health and safety hazards and report to supervisor
  • 1.3 Wear appropriate personal protective equipment and ensure correct fit
  • 1.4 Confirm availability of materials to meet production requirements
  • 1.5 Identify and confirm cleaning and maintenance requirements have been met
  • 1.6 Fit machine components and related attachments and adjust to meet operating requirements
  • 1.7 Select processing and operating parameters to meet safety and production requirements
  • 1.8 Check and adjust equipment according to manufacturer instructions to ensure optimum performance
  • 1.9 Carry out pre-start checks according to operator instructions
2. Operate and monitor the griddle product manufacturing process
  • 2.1 Start the griddle product manufacturing process according to workplace procedures
  • 2.2 Monitor equipment to identify variation in operating conditions and report variations in equipment operation
  • 2.3 Monitor the process to confirm that product meets specifications
  • 2.4 Identify, rectify and report out-of-specification product and process outcomes
  • 2.5 Conduct work and maintain a clean and tidy work area according to workplace environmental guidelines
3. Shut down the process
  • 3.1 Complete the process safely according to workplace procedures
  • 3.2 Identify and report maintenance requirements
  • 3.3 Maintain workplace records accurately according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
D4516 FDFBK2006A Operate a griddle production process Unit of competency
Replaced By
State Code National Code Title Type
ODL30 FBPHVB3015 Operate and monitor a griddle production process Unit of competency