Unit of competency Outline

Date retreived
22/07/2026 8:40 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Manufacture components for doors, windows and frames

Manufacture components for doors, windows and frames

Unit of competency
National Code
CPCCJN3003
State Code
OCQ78
TGA Status
Current
DTWD Status
Approved
Current Release Number
3.00
Current Release Date
24/12/2024
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
030101 - Manufacturing Engineering
Original Release Date
01/06/2021
Nominal Hours
22
Description
This unit of competency specifies the skills and knowledge required to manufacture components for doors, windows and frames, meeting all relevant requirements of the National Construction Code (NCC), Australian Standards, work health and safety (WHS), and Commonwealth and state or territory legislation. Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001Prepare to work safely in the construction industry meets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan and prepare.
  • 1.1 Read and interpret work instructions and plan sequence of work.
  • 1.2 Plan all work to comply with laws and regulations, the National Construction Code (NCC), Australian Standards, work health and safety (WHS) and environmental requirements, manufacturers’ specifications, workplace requirements, drawings and specifications.
  • 1.3 Select tools and equipment, check for serviceability and report any faults.
  • 1.4 Select and use personal protective equipment (PPE) for each part of the task.
  • 1.5 Inspect workplace, assess hazards and apply risk controls, including required signage and barricades.
  • 1.6 Select materials required for task, calculate quantities, handle safely and prepare and position ready for use.
2 Dress materials.
  • 2.1 Check machines and cutting tools for safe and effective operation.
  • 2.2 Adjust machine settings for task requirements.
  • 2.3 Position and cut material, check for quality and rectify faults.
3 Shape materials.
  • 3.1 Check spindles, cutting tools and jigs for safe and effective operation.
  • 3.2 Adjust spindle machine settings for task requirements.
  • 3.3 Feed material into machine and operate machine to shape material.
4 Join materials and produce components.
  • 4.1 Set out materials for joining.
  • 4.2 Check joining machines, cutting tools and jigs for safe and effective operation.
  • 4.3 Adjust joining machine settings for task requirements.
  • 4.4 Operate machine to produce joints.
5 Finish components and prepare for assembly.
  • 5.1 Check finishing and sanding machines for safe and effective operation and adjust for task requirements.
  • 5.2 Dry-assemble components, check for quality and consistency, and rectify faults.
  • 5.3 Sand and finish components, check for quality and consistency, and rectify faults.
6 Clean up.
  • 6.1 Clean up, meeting all legislative and workplace requirements for safety, waste disposal and materials handling.
  • 6.2 Clean, check, maintain and store machines, tools and equipment and report any faults.
No information
No information
Replaces
State Code National Code Title Type
W9413 CPCCJN3003A Manufacture components for door and window frames and doors Unit of competency