Unit of competency Outline

Date retreived
22/07/2026 9:58 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Monitor nonferrous melting and casting processes

Monitor nonferrous melting and casting processes

Unit of competency
National Code
MEM48003
State Code
OEV26
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
19/12/2022
View on TGA
State Implementation and Classification
Approved Date
19/04/2023
Field of Education
030713 - Metal Casting And Patternmaking
Original Release Date
19/04/2023
Nominal Hours
20
Description
This unit of competency defines the knowledge and skills required to undertake the melting and casting of nonferrous alloys.It applies where a technician will be required to monitor a nonferrous melting and casting operation, ensuring that correct quantities are used and correct procedures followed.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify job requirements from work information
2. Identify specifications for required casting
  • 2.1 Identify required material specifications
  • 2.2 Identify mould requirements
  • 2.3 Identify any special appropriate requirements
3. Verify metal charges to melting
  • 3.1 Select required components to give the required metal specification
  • 3.2 Calculate required charge of each component
  • 3.3 Recommend changes and/or additions to the charge
  • 3.4 Monitor the preparation of the charge including checking for contaminants
4. Monitor furnace operation
  • 4.1 Check that the furnace is in good operational condition and that appropriate lining is present
  • 4.2 Identify need for maintenance and/or repairs and organise accordingly
  • 4.3 Monitor a melt to ensure the product meets specification
5. Monitor pouring of molten metal
  • 5.1 Check pouring is to procedures
  • 5.2 Take required samples for analysis
6. Control hazards
  • 6.1 Identify hazards in the metal melting and pouring process
  • 6.2 Assess the risks arising from those hazards
  • 6.3 Implement procedures to control those hazards in line with procedures and duty of care
No information
No information
Replaces
State Code National Code Title Type
W9047 MSATCM303A Monitor non-ferrous melting and casting processes Unit of competency