Unit of competency Outline

Date retreived
22/07/2026 5:50 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Carry out basic electric fencing operations

Carry out basic electric fencing operations

Unit of competency
National Code
AHCINF205
State Code
OFB58
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
24/01/2023
View on TGA
State Implementation and Classification
Approved Date
09/06/2023
Field of Education
040399 - Building, N.e.c.
Original Release Date
09/06/2023
Nominal Hours
35
Description
This unit of competency describes the skills and knowledge required to install and maintain basic electric fences.The unit applies to individuals who carry out basic electric fencing operations under general supervision with limited autonomy or accountability.All work must be carried out to comply with workplace procedures, health and safety in the workplace requirements, legislative and regulatory requirements and manufacturer specifications.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for basic electric fencing operations
  • 1.1 Confirm work instructions with supervisor
  • 1.2 Identify and report workplace health and safety hazards and risks to supervisor
  • 1.3 Prepare and use tools and equipment according to supervisor instructions
  • 1.4 Carry out routine pre-operational checks of tools
  • 1.5 Identify faulty or unsafe tools, and separate for repair or replacement
  • 1.6 Select, fit and use personal protective equipment (PPE) applicable to the task
2. Perform basic electric fencing operations
  • 2.1 Identify and recover re-useable electric fencing materials
  • 2.2 Identify and carry out repair requirements according to supervisor instructions
  • 2.3 Erect electric fences according to job requirements
  • 2.4 Install electric fence components according to manufacturer instructions
3. Complete basic electric fencing operations
  • 3.1 Clear and tidy work area, and remove and dispose of or recycle rubbish and waste material
  • 3.2 Transport, clean, maintain and store tools, materials and equipment
  • 3.3 Report work outcomes and malfunctions, faults, wear or damage of tools to supervisor
No information
No information
Replaces
State Code National Code Title Type
BAR46 AHCINF201 Carry out basic electric fencing operations Unit of competency