Unit of competency Outline

Date retreived
22/07/2026 11:10 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Service and repair light vehicle lift assisted suspension systems

Service and repair light vehicle lift assisted suspension systems

Unit of competency
National Code
AURLTD002
State Code
AXC54
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030503 - Vehicle Mechanics
Original Release Date
13/07/2016
Nominal Hours
30
Description
This unit describes the performance outcomes required to service, locate and repair faults in hydraulic or pneumatic light vehicle lift assisted suspension systems. It involves preparing for the task, servicing, repairing and post-repair testing the system, and completing workplace processes and documentation.It applies to those working in the automotive service and repair industry. The lift assisted suspension systems include those of light vehicles, four wheel drives or light commercial vehicles.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to service and repair lift assisted suspension system
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Service and repair information is sourced and interpreted
  • 1.3 Hazards associated with the work are identified and risks are managed
  • 1.4 Tools, equipment and materials are selected and checked for serviceability
2. Inspect and service lift assisted suspension system
  • 2.1 System is inspected according to workplace procedures and safety requirements
  • 2.2 Inspection results are compared with manufacturer specifications to identify service and repair requirements
  • 2.3 Inspection findings are reported according to workplace procedures
  • 2.4 Service and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems
  • 2.5 Post-service testing is carried out according to workplace procedures
3. Repair lift assisted suspension system
  • 3.1 Repair information is sourced and interpreted
  • 3.2 Repair options are analysed and those most appropriate to the circumstances are selected
  • 3.3 Repair tools, equipment and materials are selected and prepared
  • 3.4 System is repaired according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems
  • 3.5 Post-repair testing is carried out according to workplace procedures
4. Complete work processes
  • 4.1 Final inspection is made to ensure work is to workplace expectations and vehicle is presented ready for use
  • 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  • 4.3 Tools and equipment are checked and stored according to workplace procedures
  • 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF224 AURLTD3002 Service and rectify faults in lift assisted suspension systems Unit of competency