Unit of competency Outline

Date retreived
22/07/2026 11:09 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Select, install, configure and test multimedia components

Select, install, configure and test multimedia components

Unit of competency
National Code
UEECS0028
State Code
OCC07
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
05/10/2020
View on TGA
State Implementation and Classification
Approved Date
12/07/2021
Field of Education
031317 - Electronic Equipment Servicing
Original Release Date
12/07/2021
Nominal Hours
36
Description
This unit involves the skills and knowledge required to select, install, configure and test multimedia components.It includes working safely; selecting, installing, configuring and testing multimedia computer system components, applications and driver software; following work instructions and completing reports.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Select and prepare to install multimedia components
  • 1.1 Work health and safety (WHS)/occupational health and safety (OHS) requirements and workplace procedures for a given work area are identified, obtained and applied
  • 1.2 Advice is sought from the work supervisor to ensure work is coordinated with others in accordance with workplace procedures
  • 1.3 Multimedia components, drivers and application software are obtained and checked in accordance with workplace procedures and job requirements
  • 1.4 Multimedia devices, drivers and application software are prepared for installing in accordance with job requirements and manufacturer specifications
2 Install multimedia components
  • 2.1 Multimedia components are assembled and connected in accordance with manufacturer instructions
  • 2.2 Multimedia devices, drivers and application software are selected in accordance with job requirements and manufacturer specifications
  • 2.3 Multimedia devices are installed and checked where hot pluggable computer is switched on and start-up conducted in accordance with workplace procedures
  • 2.4 Multimedia devices, operating system, application programs and multimedia devices are checked in accordance with workplace procedures and manufacturer specifications
  • 2.5 Multimedia devices and drivers are tested in accordance with workplace procedures, relevant industry standards and manufacturer specifications
  • 2.6 Hardware and/or software faults are identified in accordance with workplace procedures and manufacturer specifications
  • 2.7 Faults are rectified in accordance with WHS/OHS requirements and manufacturer specifications
  • 2.8 Unplanned events are referred to supervisor for direction in accordance with workplace procedures
  • 2.9 Computer is shut down in accordance with workplace procedures
  • 2.10 Work is carried out without waste of materials or damage to apparatus, circuits, the surrounding environment or services using sustainable energy principles
3 Complete work and report
  • 3.1 Work area is cleaned and made safe in accordance with workplace procedures
  • 3.2 Work report is completed and supervisor notified of completion of work in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WC405 UEENEED130A Select, install, configure and test multimedia components Unit of competency