Unit of competency Outline

Date retreived
22/07/2026 7:17 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Undertake routine hydrogen storage operations

Undertake routine hydrogen storage operations

Unit of competency
National Code
UEGNSG906
State Code
ODQ38
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
23/11/2021
View on TGA
State Implementation and Classification
Approved Date
28/01/2022
Field of Education
030399 - Process And Resources Engineering, N.e.c.
Original Release Date
28/01/2022
Nominal Hours
55
Description
This unit involves the skills and knowledge required to operate hydrogen storage operations in a hydrogen plant environment. It includes planning and undertaking routine monitoring on hydrogen storage operations and shutting down operations in the event of an emergency.It also includes using relevant resources and equipment, identifying faults and completing relevant reports and documentation.The application of the skills and knowledge described in this unit may require a licence/registration to practise in the workplace. Other conditions may apply under state and territory legislative and regulatory licensing requirements which must be confirmed prior to commencing this unit.
Notes
Elements and Performance Criteria
1 Plan hydrogen storage operations
  • 1.1 Work schedule/s, drawings, plans, job requirements and material lists are obtained, analysed and site inspection conducted, as required, to determine the preparation work required for planning and coordination
  • 1.2 Relevant person/s are consulted and work is prioritised and sequenced for completion within agreed timeframes and to industry standards in accordance with workplace procedures
  • 1.3 Hazards and work health and safety (WHS)/occupational health and safety (OHS) risks are identified and prioritised and risk control measures implemented and monitored
  • 1.4 WHS/OHS, environmental and sustainable energy policies and procedures related to the work are obtained to ensure safe systems of work are followed in accordance with workplace procedures
  • 1.5 Relevant work permit/s are obtained for non-routine activities to complete the work in accordance with job/regulatory requirements and workplace procedures
  • 1.6 Appropriate equipment, tools and personal protective equipment (PPE) required for the job are identified, obtained and checked for correct operation and safety in accordance with workplace procedures
  • 1.7 Site is prepared to minimise risk and damage to property, commerce and individuals in accordance with the work schedule and workplace procedures
2 Undertake hydrogen storage operations
  • 2.1 WHS/OHS risk control measures and policies and procedures are followed in accordance with workplace procedures
  • 2.2 Systems isolation is performed in accordance with requirements and workplace procedures
  • 2.3 Operation of storage system is monitored to ensure safety and efficiency and system operations communicated to relevant person/s and other work areas in accordance with workplace procedures
  • 2.4 Hydrogen storage operation controls are adjusted and monitored in accordance with work schedule, job requirements and workplace procedures
  • 2.5 Alarm codes, signage and other hazard warnings are correctly recognised and WHS/OHS risks and control measures monitored, actioned and appropriate authorities consulted in accordance with requirements and workplace procedures
  • 2.6 Unplanned events are dealt with in accordance with level of responsibility and workplace procedures
  • 2.7 Work is coordinated to ensure completion in agreed timeframe and to industry standards with a minimum of waste in accordance with job requirements and workplace procedures
  • 2.8 Fault-finding and troubleshooting techniques are applied to problems encountered in accordance with level of responsibility and workplace procedures
  • 2.9 Emergency shutdown procedures are applied in the event of equipment faults/failure or operational parameters being exceeded
  • 2.10 Quality and safety checks of the work are conducted in accordance with job requirements, workplace procedures and community and industry standards
3 Complete work and relevant documentation
  • 3.1 Work undertaken is checked for conformance and anomalies and proposed solutions reported to relevant person/s in accordance with workplace procedures
  • 3.2 Relevant records, reports and documentation are completed, processed and provided to appropriate person/s in accordance with workplace procedures
  • 3.3 Tools, equipment and any surplus resources/materials are cleaned, checked and securely stored and disposed of, if necessary, in accordance with workplace procedures
  • 3.4 Work site is rehabilitated/cleaned up and confirmed safe and secure in accordance with workplace procedures
  • 3.5 Notification of completion of work and tasks is communicated to relevant stakeholders in accordance with workplace procedures
No information
No information
No information