Unit of competency Outline

Date retreived
22/07/2026 10:50 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Rebuild upright and grand piano actions, keys and pedals

Rebuild upright and grand piano actions, keys and pedals

Unit of competency
National Code
MSFPT3004
State Code
WI602
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
19/06/2014
Field of Education
030199 - Manufacturing Engineering And Technology, N.e.c.
Original Release Date
19/06/2014
Nominal Hours
40
Description
This unit of competency covers rebuilding upright and grand piano actions, keys and pedals. It includes removing and rebuilding of keys and key leads; damaged or worn felts, leathers and action springs; and broken hammerheads. It applies in workplace and on-site environments for small to large scale enterprises.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan for rebuilding actions, keys and pedals
  • 1.1 Work health and safety (WHS) requirements, legislative requirements and workplace practices relevant to rebuilding pianos are verified and complied with
  • 1.2 Customer requirements are received, analysed and confirmed with appropriate personnel
  • 1.3 Communication with others involved with the work is established and maintained to ensure efficient work flow, coordination, personnel cooperation and safety
  • 1.4 Written instructions are followed
2 Prepare to rebuild
  • 2.1 Tools and equipment are selected consistent with the needs of the job
  • 2.2 Selected tools and equipment are checked for service ability and safety, and any faults repaired and reported according to workplace practices
  • 2.3 Personal protective equipment is correctly fitted and used
  • 2.4 Materials required for the repair of piano actions, keys and pedals are selected
3 Dismantle actions and keys
  • 3.1 Correct posture for rebuilding is demonstrated which minimises fatigue and promotes muscular control
  • 3.2 Actions are dismantled and all parts are named and numbered
  • 3.3 Keys are removed from keyboard and named and numbered
  • 3.4 Pedals are removed
4 Rebuild parts
  • 4.1 Parts to be rebuilt or reconditioned are identified
  • 4.2 Parts are measured and stripped of old materials in preparation for reconditioning
  • 4.3 Parts are measured and reconfigured in preparation for rebuilding
  • 4.4 Rebuilding or reconditioning of actions, key and pedals is carried out as required
  • 4.5 Quality of the rebuilding process is continuously monitored in accordance with workplace practice and quality procedures
  • 4.6 Piano actions, keys and pedals are re-assembled according to workplace practices
5 Clean up work area
  • 5.1 All tools, materials and other equipment are checked, cleaned and returned to their appropriate location
  • 5.2 Work area is cleared and waste removed
  • 5.3 Workplace documentation is completed and filed
No information
No information
No information
State Code National Code Title Type
J740 MSF31213 Certificate III in Piano Technology Qualification