Unit of competency Outline

Date retreived
23/07/2026 7:38 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Load and unload competition vehicles and support equipment

Load and unload competition vehicles and support equipment

Unit of competency
National Code
AURMBA002
State Code
AXC26
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030503 - Vehicle Mechanics
Original Release Date
13/07/2016
Nominal Hours
18
Description
This unit describes the performance outcomes required to prepare, load and unload competition vehicles and support equipment for transportation. It involves preparing for the task, selecting and packing tools and equipment, fitting transportation devices, components and covers to a competition vehicle, and loading and unloading the tools, equipment and competition vehicle.It applies to those working in the motor sport industry. The competition vehicles are over 300 kg of unladen weight. This unit does not apply to loading and loading vehicles from car trailers.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare requirements for motor sport event
  • 1.1 Job requirements are determined from team instructions, category rules and supplementary regulations
  • 1.2 Toolboxes and storage containers are checked for completeness and security to avoid damage during transportation
  • 1.3 Additional or replacement equipment and materials are sourced as required
  • 1.4 Transporter storage area is checked and cleaned as required
  • 1.5 Straps and restraint mechanisms are checked for serviceability
2. Prepare competition vehicle for transportation
  • 2.1 Competition vehicle is cleaned and prepared for transportation according to schedule, and electrical system is deactivated
  • 2.2 Transportation devices, components and covers are fitted
  • 2.3 Tie-down points on vehicle and transporter are identified
  • 2.4 Problems with equipment or vehicle are reported to appropriate persons as required
3. Load and secure competition vehicle and support equipment for transportation
  • 3.1 Vehicle and support equipment are loaded on to transporter according to team procedures and safety requirements
  • 3.2 Vehicle and support equipment are secured according to team requirements and restraints are checked
  • 3.3 Hazardous material is stored according to safety requirements and team procedures
  • 3.4 Transporter tailgates, ramps, doors and bins are closed and secured according to safety requirements and team procedures
4. Unload vehicle and support equipment
  • 4.1 Competition vehicle and support equipment are released from restraints and unloaded according to safety requirements and team procedures
  • 4.2 Transporter is cleaned and prepared for subsequent use
  • 4.3 Safety equipment is checked for currency and sufficiency, and restraint mechanisms and holding points are checked for integrity
  • 4.4 Team documentation is completed
No information
No information
Replaces
State Code National Code Title Type
WF250 AURMBA3002 Load and unload a competition vehicle and support equipment Unit of competency
State Code National Code Title Type
BAC7 AUR30916 Certificate III in Motor Sport Technology Qualification
BFY6 AUR30920 Certificate III in Motor Sport Technology Qualification