Unit of competency Outline

Date retreived
23/07/2026 5:37 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Prepare surfaces for finishing

Prepare surfaces for finishing

Unit of competency
National Code
LMFFF2004B
State Code
W8509
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
11/05/2009
View on TGA
State Implementation and Classification
Approved Date
09/12/2009
Field of Education
030117 - Furniture Polishing
Original Release Date
09/12/2009
Nominal Hours
16
Description
This unit covers the competency to prepare surfaces for the application of surface coatings by hand or machine.
Notes
Elements and Performance Criteria
1. Prepare for surface preparation
  • 1.1. Characteristics of the surface and the required surface coating materials are identified
  • 1.2. OHS requirements, including personal protection needs, are observed throughout the work
  • 1.3. Tools and equipment required, related engineering controls identified and set up
  • 1.4. Sources of contamination in work area are identified and excluded
  • 1.5. Workplace procedures for surface preparation are identified and followed according to the surface and surface coating materials being used
2. Prepare surfaces
  • 2.1. Surfaces are prepared according to workplace procedures and specification
  • 2.2. Surface preparation is checked for conformity with workplace specifications throughout the process
  • 2.3. Rectification of surface preparation faults are made as required
  • 2.4. Products are inspected and approved for suitability for further processing
  • 2.5. Defects are rectified and/or reported in accordance with workplace procedures
3. Clean work area and maintain equipment
  • 3.1. Prepared products are packed, stored and labelled ready for next process
  • 3.2. Equipment used is cleaned and inspected for serviceable condition and stored appropriately
  • 3.3. Unserviceable equipment is tagged, faults are identified and appropriate personnel are informed
  • 3.4. Chemicals used are stored or disposed of correctly according to regulations
  • 3.5. Work area is cleaned ready for next process or task
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Unit context
OHS requirements include legislation, building codes, material safety management systems, hazardous substances and dangerous goods code and local safe operating procedures
Work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements
Work requires individuals to demonstrate some discretion, judgement and problem solving skills in the preparation of surfaces
Surfaces
Surfaces to be prepared may include but are not limited to:
solid timber
manufactured board
metal
Tools and equipment are to include:
measuring tapes and rulers
squares
hammer
nail punch
liquid containers
brushes
cabinet scrapers
file
oil stone
steel wool/scourers
sanding blocks
steam iron
chisels
power sanders
air compressor and hoses
fixed belt/stroke sander
Tools and equipment may also include:
plane
spanners
screwdrivers
clamps
drill
mallet
vice
saw








EVIDENCE GUIDE
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Critical Aspects of Evidence
Interpret work order and locate and apply relevant information
Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
Follow work instructions, operating procedures and inspection practices to:
minimise the risk of injury to self or others
prevent damage to goods, equipment and products
maintain required production output and product quality
Prepare surfaces on a minimum of four occasions, including:
horizontal surface
vertical surface
internal surface
curved surface (moulding)
Surfaces are to include:
solid hardwood
solid softwood
veneered board
Work effectively with others
Modify activities to cater for variations in workplace context and environment

Resource Implications
Range of surfaces to be prepared, preparation tools, equipment and consumables.

Method of Assessment
Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts.
Assessment should be by direct observation of tasks and questioning on underpinning knowledge.
Assessment should be conducted over time and may be in conjunction with assessment of other relevant units of competency.

Context of Assessment
Assessment may occur on the job or in a workplace simulated facility with relevant process equipment, materials, work instructions and deadlines.


Replaces
State Code National Code Title Type
W0256 LMFFF2004A Prepare surfaces for finishing Unit of competency
Replaced By
State Code National Code Title Type
WI316 MSFFF2004 Prepare surfaces for finishing Unit of competency