Unit of competency Outline

Date retreived
22/07/2026 8:16 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Manufacture and assemble joinery components

Manufacture and assemble joinery components

Unit of competency
National Code
CPCCJN3004
State Code
OCM46
TGA Status
Current
DTWD Status
Approved
Current Release Number
3.00
Current Release Date
24/12/2024
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
030101 - Manufacturing Engineering
Original Release Date
01/06/2021
Nominal Hours
40
Description
This unit of competency specifies the skills and knowledge required to carry out machining and manufacturing and assembling joinery components, meeting all relevant requirements of Australian Standards, work health and safety (WHS), and Commonwealth and state or territory legislation. Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001Prepare to work safely in the construction industry meets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan and prepare.
  • 1.1 Read and interpret work instructions and plan sequence of work.
  • 1.2 Plan all work to comply with laws and regulations, Australian Standards, work health and safety (WHS) and environmental requirements, manufacturers’ specifications, workplace requirements, drawings and specifications.
  • 1.3 Select tools and equipment, check for serviceability and report any faults.
  • 1.4 Select and use personal protective equipment (PPE) for each part of the task.
  • 1.5 Inspect workplace, assess hazards and apply risk controls.
  • 1.6 Select materials required for task, calculate quantities, handle safely and prepare and position ready for use.
2 Manufacture components.
  • 2.1 Determine types of component parts from working drawings and specifications.
  • 2.2 Select processes for manufacture, joining techniques and components.
  • 2.3 Select machines to be used and plan sequence of machining.
  • 2.4 Check safety requirements for each machine for compliance with WHS requirements and AS 1473 Guarding and safe use of woodworking machinery.
  • 2.5 Determine space requirements for manufacture of components.
  • 2.6 Use machine to manufacture components to working drawings and specifications.
3 Assemble components.
  • 3.1 Check components for accuracy, quality and suitability by dry-assembling components in their assembled positions.
  • 3.2 Assemble and secure components using adhesive and mechanical fasteners to specification.
  • 3.3 Check assembled units for square, free of wind and with adhesive removed.
4 Check and assembled units and prepare for packaging.
  • 4.1 Inspect assembled units for faults and take appropriate remedial action.
  • 4.2 Make units ready for packaging by protecting material edges and surfaces and stacking.
5 Clean up.
  • 5.1 Clean up, meeting all legislative and workplace requirements for safety, waste disposal, recycling and re-use and materials handling.
  • 5.2 Check, maintain and store tools and equipment and report any faults.
No information
No information
Replaces
State Code National Code Title Type
W9414 CPCCJN3004A Manufacture joinery components Unit of competency
State Code National Code Title Type
BGB8 CPC30220 Certificate III in Carpentry Qualification
BGC8 CPC20220 Certificate II in Construction Pathways Qualification
BGD6 CPC31920 Certificate III in Joinery Qualification