Unit of competency Outline

Date retreived
22/07/2026 2:56 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Modify orthopaedic devices

Modify orthopaedic devices

Unit of competency
National Code
HLTCT406C
State Code
D5847
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
25/03/2011
View on TGA
State Implementation and Classification
Approved Date
02/08/2011
Field of Education
061799 - Rehabilitation Therapies, N.e.c.
Original Release Date
02/08/2011
Nominal Hours
60
Description
DescriptorThis unit of competency describes the skills and knowledge required to modify orthopaedic devices. Simple modifications, which do not alter the intent of the orthopaedic device, may be performed at the technician's discretion
Notes
Elements and Performance Criteria
1. Prepare to modify orthopaedic devices
  • 1.1 Assemble and check equipment for modifying orthopaedic devices to ensure that it is in clean and in working order
  • 1.2 Receive request for modification of orthopaedic device and if in doubt confirm request with relevant personnel
  • 1.3 Assess client's condition and identify precautions or potential complications associated with the modification of orthopaedic device
  • 1.4 Explain procedure to client and obtain client consent/agreement
  • 1.5 Provide the client with opportunities to ask questions and discuss areas of concern
  • 1.6 Meet the comfort and safety needs of the client and applicator
  • 1.7 Review condition of the wound and pin site and refer to relevant personnel as required
2. Modify orthopaedic device
  • 2.1 Appropriately position the area to which the orthopaedic device is to be modified
  • 2.2 Identify client's specific needs in relation to the modification of orthopaedic device
  • 2.3 Meet the comfort and safety needs of the client and applicator
  • 2.4 Modify the orthopaedic device according to instructions and to meet the client's needs
  • 2.5 Achieve correct moulding to maintain soft tissue or fracture position in accordance with pattern or condition of injury
  • 2.6 Complete documentation
3. Undertake post modification procedures
  • 3.1 Clean client at completion of procedure
  • 3.2 Ensure the neurovascular status of limb is within normal limits
  • 3.3 Check the fit and functionality of orthopaedic device
  • 3.4 Provide client and carer with written and verbal advice for the care of the limb and orthopaedic device
  • 3.5 Fit client with sling, heel/overshoes and ambulation aids, as required
  • 3.6 Instruct client on the correct use of the ambulation aids , as required and ensure client is safe in the use of these aids
  • 3.7 Arrange appropriate support for the client
4. Clean working environment
  • 4.1 Dispose of waste in accordance with waste management policies
  • 4.2 Clean equipment accordance with manufacturer's specifications and stored safely
  • 4.3 Clean work surfaces in accordance with infection control guidelines
No information
No information
Replaces
State Code National Code Title Type
C9151 HLTCT406B Modify orthopaedic devices Unit of competency
Replaced By
State Code National Code Title Type
WD103 HLTCT406D Modify orthopaedic devices Unit of competency
No information