Unit of competency Outline

Date retreived
22/07/2026 4:23 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Remove, inspect and refit heavy vehicle wheel and tyre assemblies

Remove, inspect and refit heavy vehicle wheel and tyre assemblies

Unit of competency
National Code
AURHTJ003
State Code
AXD28
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030503 - Vehicle Mechanics
Original Release Date
13/07/2016
Nominal Hours
20
Description
This unit describes the performance outcomes required to remove, inspect and refit the wheel and tyre assemblies of heavy vehicles. It involves identifying and confirming work requirements; preparing for the work; removing, inspecting and refitting the wheel and tyre assembly; and completing workplace processes and documentation.It applies to those working in the automotive service and repair industry. The wheel and tyre assemblies include those of agricultural machinery, forklifts, heavy commercial vehicles or mobile plant machinery. This unit does not apply to off-the-road tyres of mobile plant machinery.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to remove wheel and tyre assembly
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Removal, inspection and refitting information is sourced and interpreted
  • 1.3 Hazards associated with the work are identified and risks are managed
  • 1.4 Tools, equipment and materials are selected and checked for serviceability
2. Remove and inspect wheel and tyre assembly
  • 2.1 Wheel and tyre assembly is removed according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to components or systems
  • 2.2 Wheel and tyre assembly, mounting points and attachment devices are inspected for condition, damage and wear
  • 2.3 Inspection findings are reported according to workplace procedures, including recommendations for necessary repairs, replacements or adjustments
3. Refit wheel and tyre assembly
  • 3.1 Refitting options are analysed and those most appropriate to the circumstances are selected
  • 3.2 Wheel and tyre assembly is fitted and adjusted according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to components or systems
  • 3.3 Tightening sequence and torque settings are completed according to manufacturer specifications and workplace procedures
  • 3.4 Wheel and tyre assembly is checked for correct assembly, run-out and alignment according to manufacturer specifications and workplace procedures
4. Complete work processes
  • 4.1 Final inspection is made to ensure work is to workplace expectations and vehicle is presented ready for use
  • 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  • 4.3 Tools and equipment are checked and stored according to workplace procedures
  • 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF156 AURHTJ2003 Remove, inspect, and refit heavy vehicle wheel assemblies Unit of competency
Replaced By
State Code National Code Title Type
OCJ61 AURHTJ103 Remove, inspect and refit heavy vehicle wheel and tyre assemblies Unit of competency