Unit of competency Outline

Date retreived
23/07/2026 12:23 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Inspect, service and repair hay cutting, raking and baling equipment

Inspect, service and repair hay cutting, raking and baling equipment

Unit of competency
National Code
AURKTA010
State Code
AXC78
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030701 - Mechanical Engineering
Original Release Date
13/07/2016
Nominal Hours
35
Description
This unit describes the performance outcomes required to inspect, service and repair faults in hay cutting, raking and baling equipment. It involves preparing for the task, inspecting the equipment to determine the service and repair requirements, carrying out the service and repair, performing post-repair testing, and completing workplace processes and documentation.It applies to those working in the automotive service and repair industry. The hay cutting, raking and baling equipment is that of agricultural machinery and refers to specialised equipment involved in baling hay. It does not cover generalised equipment and systems that form the platform or the towing vehicle. This unit does not apply to the use of headers for grain, sugar cane, cotton, rice, vegetable and fruit crops.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to inspect hay cutting, raking and baling equipment
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Inspection procedures and information for hay cutting, raking and baling equipment are sourced and interpreted
  • 1.3 Options are analysed and those most appropriate to the circumstances are selected
  • 1.4 Hazards associated with the work are identified and risks are managed
  • 1.5 Tools, equipment and materials are selected and checked for serviceability
2. Conduct inspection and analyse results
  • 2.1 Inspection is carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements
  • 2.2 Inspection results are compared with manufacturer specifications
  • 2.3 Inspection findings are reported according to workplace procedures, and include recommendations for necessary service, repairs or adjustments
3. Service and repair equipment
  • 3.1 Service and repair procedures and information are sourced and interpreted
  • 3.2 Service and repair tools, equipment and materials are selected and checked
  • 3.3 Service and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements
  • 3.4 Repairs and component replacements and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements
  • 3.5 Equipment and systems are test run and adjustments are carried out as required
4. Prepare equipment for operation
  • 4.1 Variable operating parameters are identified from manufacturer specifications and analysis of proposed work environment and conditions
  • 4.2 Equipment variables, including management system settings, controls and monitoring systems, are established and prepared for proposed operations
  • 4.3 Equipment and systems are test run and final adjustments are made
  • 4.4 Post-repair testing is carried out according to workplace procedures
5. Complete work processes
  • 5.1 Final inspection is made to ensure work is to workplace expectations and equipment is presented ready for use, including ensuring that protective guards, safety features and cowlings are in place
  • 5.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  • 5.3 Tools and equipment are checked and stored according to workplace procedures
  • 5.4 Workplace documentation is processed according to workplace procedures
No information
No information
No information