Unit of competency Outline

Date retreived
22/07/2026 6:17 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Colour manage signs

Colour manage signs

Unit of competency
National Code
CPCCSG3003
State Code
BBA81
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
09/09/2016
View on TGA
State Implementation and Classification
Approved Date
23/01/2017
Field of Education
040325 - Painting, Decorating And Sign Writing
Original Release Date
23/01/2017
Nominal Hours
20
Description
This unit of competency specifies the outcomes required to assess and apply colour consistently across a range of visual media used to produce signs. It requires the application of colour theory and an ability to use industry-recognised software, hardware and colour matching systems for a range of output devices.The unit supports sign manufacturers working with different media where the accuracy and consistency of colour are critical to the quality of the final product.No licensing, legislative, regulatory or certification requirements apply to this unit of competency at the time of endorsement.
Notes
Elements and Performance Criteria
1 Plan and prepare to manage colour.
  • 1.1 Job requirements are identified from drawings, specifications, instructions and client briefs, confirmed, and applied to planning and preparation.
  • 1.2 Colour matching system appropriate to the task is selected.
  • 1.3 Digital devices used in production of signs are identified and calibrated for colour accuracy and consistency using industry-recognised calibration software and techniques, and faults are identified and rectified or reported to relevant personnel before starting work.
  • 1.4 Colour profile appropriate to the task is identified and set up in industry-recognised software.
  • 1.5 Digital image is imported into software and converted to correct colour profile as necessary.
2 Apply and modify colour.
  • 2.1 Colour legibility is assessed against job requirements, and levels of contrast are adjusted and applied to sign design.
  • 2.2 Colour scheme is determined and principles of colour harmony are applied to sign according to client requirements.
  • 2.3 Test prints are produced and checked against job requirements.
  • 2.4 Sign is colour corrected as required using software tools to ensure consistent application of colour.
3 Maintain colour management systems.
  • 3.1 Colour management systems are routinely checked for accuracy and updated when necessary.
  • 3.2 Digital devices used in sign production are routinely checked and recalibrated when necessary.
No information
No information
Replaces
State Code National Code Title Type
W9520 CPCCSI2001A Use colour for signage Unit of competency
State Code National Code Title Type
BDJ3 CPC30216 Certificate III in Signs and Graphics Qualification