Unit of competency Outline

Date retreived
22/07/2026 9:30 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Fit and adjust curtain hardware

Fit and adjust curtain hardware

Unit of competency
National Code
MSFSF2011
State Code
WI626
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
19/06/2014
Field of Education
030115 - Furniture Upholstery And Renovation
Original Release Date
19/06/2014
Nominal Hours
48
Description
This unit of competency covers fitting and adjusting tracking, rods, poles and other curtain hardware.Licensing, legislative or certification requirements may apply to this unit and relevant state/territory and local government agencies should be consulted to determine any necessary certification or licensing for undertaking curtain fitting work. Access to construction sites requires certification of general induction training specified by the National Code of Practice for Induction for Construction Work (ASCC 2007).
Notes
Elements and Performance Criteria
1 Identify products, fittings and attachments to be used
  • 1.1 Type of tracks, rods or poles to be fitted and work order requirements are identified
  • 1.2 Attachments, required materials and tools are identified from work instructions and, where necessary, site inspection
  • 1.3 The effect of the fitting process on overall finished window is identified
2 Plan process for fitting attachments to products
  • 2.1 Work health and safety (WHS) requirements, including ergonomic criteria and personal protection needs, are observed throughout the work
  • 2.2 Appropriate equipment is identified to minimise risks of damage to customers' premises or injuries to self
  • 2.3 Manufacturer information on products used is located and used to plan work
  • 2.4 Attachment process is planned to conform to quality requirements, minimise time, economically use materials and maximise appearance of the finished work
  • 2.5 Materials, tools and equipment are assembled and checked for suitability for purpose
  • 2.6 Track/pole/rod width and projection is set up to provide for stacking space, overlap, projection, return, and number of rings/hooks, guides/runners and other fittings in order to correctly match work order requirements
3 Complete fitting operations
  • 3.1 Work plan is followed ensuring compliance with workplace procedures and WHS requirements
  • 3.2 Ceiling and face-fitted tracks/rods/poles are installed and tested for correct operation
4 Clean work area and prepare products for the next process
  • 4.1 Worksite and any equipment used is cleaned and stored appropriately
  • 4.2 Unserviceable equipment is tagged, faults are identified and appropriate personnel are informed
  • 4.3 Completed work is inspected and compared to workplace quality requirements
  • 4.4 Fittings which do not meet quality specifications are repaired on-site or returned to the workroom for repair
  • 4.5 Appropriate documentation is completed
No information
No information
Replaces
State Code National Code Title Type
W8767 LMFSF2011B Fit and adjust curtain hardware Unit of competency
Replaced By
State Code National Code Title Type
OEM26 MSFSF2021 Fit and adjust curtain hardware Unit of competency
State Code National Code Title Type
J725 MSF20113 Certificate II in Furnishing Qualification
J734 MSF30613 Certificate III in Soft Furnishing Qualification