Install pre-cast girders

Unit of competency Outline

Date retreived
22/07/2026 5:36 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Unit of competency

National Code
RIICBM302E

State Code
OCX62

TGA Status
Current

DTWD Status
Approved

Current Release Number
1.00

Current Release Date
25/01/2021

View on TGA

State Implementation and Classification

Approved Date

18/06/2021

Field of Education

030901 - Construction Engineering

Original Release Date

18/06/2021

Nominal Hours

Description

This unit describes the skills and knowledge required to install pre-cast girders in civil construction. This includes installing bearings and pre-cast concrete girders on multi-span bridges with a minimum length of twenty metres.It applies to those working in operational roles. They generally work under minimal supervision to undertake a broad range of tasks in varied work contexts, using some discretion and judgement in selecting equipment, services or contingency measures.Licensing, legislative and certification requirements that apply to this unit can vary between states, territories, and industry sectors. Users must check requirements with relevant body before applying the unit.

Notes

Elements and Performance Criteria

1. Plan and prepare to install pre-cast girders

1.1 Obtain, interpret, clarify and confirm work instructions
1.2 Access, interpret and apply documentation required to install pre-cast girders and confirm work activity is compliant
1.3 Obtain and interpret emergency procedures, and identify steps required to respond to emergencies
1.4 Select and wear personal protective equipment according to site requirements
1.5 Confirm and identify requirements for complying with environmental protection, safety and traffic management signage requirements
1.6 Identify, address and report environmental issues, potential hazards and risks
1.7 Select plant, tools and equipment required to carry out tasks and check for faults
1.8 Identify, confirm, and locate materials required for work application

2. Position and install bearings

2.1 Determine bearing types and position according to job requirements
2.2 Confirm quality of bearing dimensions and materials
2.3 Install bearings according to job and site requirements
2.4 Identify and install locating brackets and bolts in preparation for placement of girders

3. Install girder

3.1 Determine individual girder location according to job requirements
3.2 Determine fitting sequence to install girders and advise crane operator
3.3 Confirm girders conform to design requirements
3.4 Check lifting points on girders for serviceability and attach and use tag lines to guide girder to position according to job requirements
3.5 Place timber packing to support girder load
3.6 Use drift to align holes and insert and tension locating bolts according to job requirements
3.7 Adjust bearings such that the full face of the bearing provides support to the girder
3.8 Brace girder to prevent lateral movement or rolling
3.9 Remove, roll and store tag lines according to job and site requirements
3.10 Remove excess epoxy putty according to job and site requirements
3.11 Remove timber packing at specified time according to job and site requirements

4. Conduct clean up activities

4.1 Clear work area and dispose of or recycle materials according to site requirements
4.2 Clean, check, perform maintenance on and store plant, tools and equipment according to manufacturer specifications and site requirements

No information

Replaces

State Code	National Code	Title	Type
WH040	RIICBM302D	Install pre-cast girders	Unit of competency

State Code	National Code	Title	Type
BGL0	RII30920	Certificate III in Civil Construction	Qualification