Unit of competency Outline
Date retreived
22/07/2026 11:30 AM AWST
22/07/2026 11:30 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Develop explosive ordnance disposal techniques and render safe procedures
Develop explosive ordnance disposal techniques and render safe procedures
Unit of competency
National Code
DEFEXO114
DEFEXO114
State Code
AVR72
AVR72
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
05/08/2016
Field of Education
039999 - Engineering And Related Technologies, N.e.c.
Original Release Date
05/08/2016
Nominal Hours
0
Description
This unit describes the skills required to develop explosive ordnance disposal (EOD) techniques and render safe procedures (RSPs). The development of EOD techniques and RSPs is a process that would not normally be undertaken except in an operational environment where time was of essence and normal techniques were not feasible or possible. The development of explosive ordnance disposal techniques and RSPs is a process primarily in support of the civilian community/authority but may also be conducted under a variety of conditions, including wartime and peacekeeping.This unit applies to those required to develop explosive ordnance disposal techniques and RSPs as a consequence of an operational requirement.The skills and knowledge described in this unit must be applied within the legislative, regulatory and policy environment in which they are carried out. Organisational policies and procedures must be consulted and adhered to.Those undertaking this unit would work independently and as part of a team, under indirect supervision, conducting complex tasks in a broad range of contexts that could be unpredictable.No licensing, legislative or certification requirements apply to unit at the time of publication.
Notes
Elements and Performance Criteria
1 Locate, assess and identify explosive device
- 1.1 Locate explosive device and identify its components
- 1.2 Identify and investigate explosive device construction
- 1.3 Advise controlling authority of safety and evacuation requirements
- 1.4 Confirm area security
- 1.5 Establish contact and liaison with other emergency services on arrival and maintain throughout
- 1.6 Seek specialist advice in accordance with assessment requirements
2 Determine RSP/dispose of explosive device
- 2.1 Determine RSP /disposal method after considering situation
- 2.2 Identify and prepare for use equipment, tools and stores required to render safe/dispose of explosive device
- 2.3 Conduct RSP in accordance with developed process and recognised safety precautions
- 2.4 Operate equipment in accordance with current instructions
- 2.5 Inspect device and immediate area and declare them to be safe or plan alternate RSP/disposal operation
3 Finalise activities
- 3.1 Document and distribute RSP/disposal method
- 3.2 Recover, refurbish and secure equipment
- 3.3 Conduct post-explosive device disposal clearance
- 3.4 Complete and process explosive device disposal reports
- 3.5 Provide technical evidence to inquiries/courts as required
No information
No information
No information
| State Code | National Code | Title | Type |
|---|---|---|---|
| AWW4 | DEF82115 | Graduate Diploma of Explosive Ordnance | Qualification |
| BFV1 | DEF80120 | Graduate Diploma of Explosives | Qualification |