Unit of competency Outline
Date retreived
22/07/2026 1:14 AM AWST
22/07/2026 1:14 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Assemble and install recreational vehicle slide-outs
Assemble and install recreational vehicle slide-outs
Unit of competency
National Code
MSMRV374
MSMRV374
State Code
OFD52
OFD52
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
24/05/2023
Field of Education
030503 - Vehicle Mechanics
Original Release Date
24/05/2023
Nominal Hours
25
Description
This unit describes the skills and knowledge required to assemble and install slide-outs (room extenders) in recreational vehicles.The unit applies to a person working in a recreational vehicle manufacturing facility who undertakes routine tasks according to job instructions, plans/specifications and procedures and uses discretion and judgement in selecting equipment, services and contingency measures. They work with a high degree of self-direction and limited supervision. They apply known solutions to routine problems and report non-routine problems according to procedures. They are responsible for their output and have limited responsibility for the output of others.No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Prepare to assemble and install slide-outs
- 1.1 Identify slide-out assembly and installation requirements from job instructions
- 1.2 Select and check all required tools and equipment are ready to use
- 1.3 Gather slide-out subassemblies and other items required by job specifications, and check they meet quality requirements and are ready for installation
- 1.4 Identify hazards and hazard controls and check the hazard controls are in place and operating
- 1.5 Check the recreational vehicle and work area are ready for installing the slide-out
2. Assemble the slide-out
- 2.1 Identify the assembly procedure and sequence according to assembly instructions
- 2.2 Lay out and fasten together the slide-out subassemblies according to assembly instructions
- 2.3 Check the subassemblies according to job instructions and quality requirements and rectify any deficiencies
- 2.4 Complete assembling the slide-out according to workplace procedures
- 2.5 Check the finished assembly according to job instructions and quality requirements and rectify any deficiencies
3. Install the slide-out
- 3.1 Correctly position and secure the slide-out, and make penetrations using the correct tools
- 3.2 Fasten the slide-out to the walls/chassis according to workplace procedures
- 3.3 Install seals and complete finishing to meet quality requirements
- 3.4 Check finished slide-out installation accords with job instructions and quality requirements and rectify any deficiencies
4. Complete the assembly and installation according to workplace procedures
- 4.1 Clean up the recreational vehicle in readiness for the next task
- 4.2 Clean up the work area, identify items for recycling and dispose of waste
- 4.3 Identify, tag and report any damage to equipment and tools
- 4.4 Check, clean and do routine maintenance on equipment and tools and store them and unused materials
- 4.5 Complete task outcome documentation
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| AWC62 | MSMRV315 | Construct and fit slide out in a recreational vehicle | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| BJC9 | MSM31122 | Certificate III in Recreational Vehicle Manufacturing | Qualification |