Unit of competency Outline

Date retreived
22/07/2026 6:58 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Design a refractory lining

Design a refractory lining

Unit of competency
National Code
PMC557091
State Code
BAH07
TGA Status
Deleted
DTWD Status
Transition (Deleted)
Current Release Number
1.00
Current Release Date
22/06/2016
View on TGA
State Implementation and Classification
Approved Date
05/08/2016
Field of Education
030305 - Materials Engineering
Original Release Date
05/08/2016
Nominal Hours
45
Description
This unit of competency covers the skills and knowledge required to design a refractory lining. This unit of competency applies to operators who are required to negotiate agreed requirements for the refractory installation and identify and develop design and technical specifications for the optimum refractory system to meet the requirements.This unit of competency applies to senior technicians or those in similar roles who are required to analyse and synthesise advanced theoretical and technical knowledge and apply independent judgement to high-level technical issues and complex problems. The individual may work in liaison with other refractory specialists or they may be the sole refractory specialist for this job or in their organisation.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Confirm required end use
  • 1.1 Liaise with relevant stakeholders
  • 1.2 Confirm the end use conditions for the refractory
  • 1.3 Identify discrepancies or conflicts in requirements
  • 1.4 Negotiate a consistent set of requirements for the refractory installation
2 Undertake preliminary design
  • 2.1 Compare the benefits of different types of refractory installations
  • 2.2 Undertake required structural design calculations
  • 2.3 Undertake the required heat transfer calculations
  • 2.4 Undertake relevant thermal expansion calculations
  • 2.5 Determine implications for refractory material selection
  • 2.6 Liaise with refractory material selector
3 Compare possible design solutions
  • 3.1 Compare the refractory systems with the set of requirements
  • 3.2 Rank possible refractory system solutions
  • 3.3 Identify health, safety and environmental (HSE) risks of top ranked possible refractory system solutions
  • 3.4 Estimate the cost of top ranked possible refractory system solutions
4 Design refractory system
  • 4.1 Liaise with relevant stakeholders
  • 4.2 Determine installation, repair or removal issues of relevance to the refractory systems
  • 4.3 Review shortlist ranking
  • 4.4 Recommend optimum refractory system for the end use
5 Develop design and technical specification for recommended refractory component
  • 5.1 Determine suitable format for design and specification
  • 5.2 Prepare design and specification
  • 5.3 Review specification with refractory material selector, production and customer
  • 5.4 Modify design and specification if required
  • 5.5 Publish design and specification in required format to required people/organisations
No information
No information
Replaces
State Code National Code Title Type
WA977 PMC557091A Design a refractory lining Unit of competency
State Code National Code Title Type
BCV0 PMC80116 Graduate Certificate In Refractories Engineering Qualification