Unit of competency Outline

Date retreived
22/07/2026 8:22 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Operate electrical stimulator

Operate electrical stimulator

Unit of competency
National Code
MTMP2013C
State Code
D8775
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
22/07/2011
State Implementation and Classification
Approved Date
16/07/2012
Field of Education
030717 - Plant And Machine Operations
Original Release Date
16/07/2012
Nominal Hours
10
Description
This unit covers the skills and knowledge required to operate manual carcase stimulation equipment or monitor automatic carcase stimulation equipment.
Notes
Elements and Performance Criteria
1. Conduct pre-operational check of stimulationequipment
  • 1.1. Electrical stimulation unit is regularly checked to ensure it is in good working order.
  • 1.2. Equipment is maintained by cleaning electrodes (where applicable).
  • 1.3. Circuit boards or cards are replaced if a fault develops (where this forms part of operator's work instructions).
2. Follow effective electrical stimulation procedures
  • 2.1. Electrical stimulation is applied within the required time after stunning.
  • 2.2. Constant contact with electrodes is ensured during stimulation.
  • 2.3. Occupatioanl Health and Safety (OH&S) requirements are identified and met.
  • 2.4. Stimulation is run to its full time according to the workplace or manufacturer's specifications for the type of stimulation equipment.
  • 2.5. When using the nasal or rail methods, the carcase contact with the rubbing bar is maintained during electrical stimulation to ensure stimulation is effective.
  • 2.6. Loss of voltage is prevented by keeping carcases separated during stimulation.
  • 2.7. Peak voltage levels are checked and maintained to ensure effective stimulation.
  • 2.8. Carcase is stimulated in accordance with workplace requirements.
3. Check for ineffective stimulation
  • 3.1. Electrical stimulation unit is checked regularly to ensure that current is maintained to specified level, stimulation is applied within specified time limits after stunning, and duration of stimulation meets workplace requirements.
  • 3.2. Electrodes are checked to ensure they are attached during stimulation.
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Stimulationequipment may include:
extra low voltage (ELV)
nasal to leg or rail
nasal to rectal
rectal
high voltage (HV).
OH&S requirements may include:
enterprise OH&S policies, procedures and programs
OH&S legal requirements
Personal Protective Equipment (PPE) which may include:
coats and aprons
ear plugs or muffs
eye and facial protection
head-wear
lifting assistance
mesh aprons
protective boot covers
protective hand and arm covering
protective head and hair covering
uniforms
waterproof clothing
work, safety or waterproof footwear
requirements set out in standards and codes of practice.
Communication skills may include:
listening and understanding
sharing information
speaking clearly and directly
working and communicating with diverse individuals and groups.
Regulatory requirements may include:
Export Control Act
hygiene and sanitation requirements
relevant regulations
requirements set out in AS 4696:2007 Australian Standard for Hygienic Production and Transportation of Meat and Meat Products for Human Consumption
state and territory regulations regarding meat processing.
Workplace requirements may include:
enterprise-specific requirements
OH&S requirements
Quality Assurance (QA) requirements
Standard Operating Procedures (SOPs)
the ability to perform the task to production requirements
work instructions.
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
The meat industry has specific and clear requirements for evidence. A minimum of three forms of evidence is required to demonstrate competency in the meat industry. This is specifically designed to provide evidence that covers the demonstration in the workplace of all aspects of competency over time.
These requirements are in addition to the requirements for valid, current, authentic and sufficient evidence.

Three forms of evidence means three different kinds of evidence - not three pieces of the same kind. In practice it will mean that most of the unit is covered twice. This increases the legitimacy of the evidence.

All assessment must be conducted against Australian meat industry standards and regulations.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Competency must be demonstrated in the workplace at normal chain speed.
Context of, and specific resources for assessment
Assessment must be conducted in the workplace under normal production conditions.
Method of assessment
Recommended methods of assessment include:
quiz of underpinning knowledge
workplace demonstration
workplace referee or third-party report of performance over time.

Assessment practices should take into account any relevant language or cultural issues related to Aboriginality or Torres Strait Islander, gender, or language backgrounds other than English. Language and literacy demands of the assessment task should not be higher than those of the work role.
Guidance information for assessment
A current list of resources for this unit of competency is available from MINTRAC www.mintrac.com.au or telephone 1800 817 462.
Replaced By
State Code National Code Title Type
BBA71 AMPA2009 Operate electrical stimulator Unit of competency
State Code National Code Title Type
D595 MTM20111 Certificate II in Meat Processing (Abattoirs) Qualification