Unit of competency Outline

Date retreived
22/07/2026 8:04 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Remove and replace conventional engine assemblies

Remove and replace conventional engine assemblies

Unit of competency
National Code
AURTTE006
State Code
WI941
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
16/01/2015
View on TGA
State Implementation and Classification
Approved Date
26/06/2015
Field of Education
030503 - Vehicle Mechanics
Original Release Date
26/06/2015
Nominal Hours
20
Description
This unit describes the performance outcomes required to remove and replace the conventional engine assembly of a vehicle. It requires the learner to plan and prepare the task; remove the engine and inspect the associated components; replace the engine and check its operation; and maintain the work area, tools and equipment.It applies to those undertaking a Vocational Education and Training in Schools (VETiS) or pre-vocational qualification as preparation to entering the automotive service and repair or automotive manufacturing industry.The unit is designed for use in a highly supervised context and is not suitable for use in a vocational qualification.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Plan and prepare for engine removal and replacement
  • 1.1 Safety and environmental requirements are sourced and interpreted
  • 1.2 Task instruction is interpreted and vehicle to be worked on is identified
  • 1.3 Manufacturer specifications and workplace procedures for engine removal and replacement are sourced and interpreted
  • 1.4 Potential hazards and risks associated with task are identified and reported to workplace supervisor
  • 1.5 Tools and equipment required for engine removal and replacement are identified according to manufacturer specifications
2. Remove engine assembly and inspect engine and associated components
  • 2.1 Tools, equipment and materials are selected and checked prior to use according to manufacturer specifications and workplace safety procedures
  • 2.2 Vehicle is prepared for engine removal according to workplace procedures and safety and environmental requirements
  • 2.3 Engine and associated components are identified and inspected according to manufacturer specifications
  • 2.4 Engine is removed according to workplace procedures, manufacturer specifications and safety requirements, and without causing damage to components, tools or equipment
  • 2.5 Engine and associated component inspection results are recorded
3. Replace engine assembly
  • 3.1 Engine and associated components are prepared for assembly
  • 3.2 Engine is replaced according to workplace procedures, manufacturer specifications and safety requirements, and without causing damage to components, tools or equipment
  • 3.3 Engine fluid levels are checked and topped up with the appropriate lubricant and coolant according to manufacturer specifications and procedures
  • 3.4 Engine and vehicle is tested for correct operation
4. Complete work processes
  • 4.1 Final inspection is made to ensure work meets task instruction and workplace standards, and engine or vehicle is presented ready for use
  • 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored according to environmental requirements and workplace procedures
  • 4.3 Tools and equipment are checked and stored in a condition ready for use according to workplace procedures, or tagged and reported where necessary
  • 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
No information