Unit of competency Outline

Date retreived
23/07/2026 5:51 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install exterior blinds and awnings

Install exterior blinds and awnings

Unit of competency
National Code
MSFBA3002
State Code
WI263
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
19/06/2014
Field of Education
030199 - Manufacturing Engineering And Technology, N.e.c.
Original Release Date
19/06/2014
Nominal Hours
30
Description
This unit of competency covers installation of exterior blinds and awnings. It applies in an on-site residential or commercial environment.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Identify products, fittings and attachments for installation
  • 1.1 Type of blind or awning to be installed is identified
  • 1.2 Installation hardware, tools and equipment are identified from work instructions and site inspection conducted in consultation with customer
  • 1.3 Customer is consulted to determine day and time for installation
  • 1.4 Local government regulations regarding installation of exterior blinds and awnings are checked and adhered to
2 Plan installation process
  • 2.1 Work health and safety (WHS) requirements and personal protection needs are observed throughout the work
  • 2.2 Work order is read and interpreted and installation sequence is planned in a logical order to suit job
  • 2.3 Worksite is checked to determine access and special equipment requirements
3 Install exterior blind or awning
  • 3.1 Public and property is protected and product to be installed is laid out and checked against work order
  • 3.2 Fixing hardware is installed to manufacturer specifications
  • 3.3 Blind or awning is installed to manufacturer specifications
4 Complete the installation
  • 4.1 Operation of product is tested within limitations of normal operation and adjusted if necessary
  • 4.2 Customer is shown correct use of product
5 Clean work area
  • 5.1 Tools and equipment are cleaned and stored according to workplace practices
  • 5.2 Work area is cleaned and left in a safe condition
  • 5.3 Waste and scrap are removed and disposed of be in accordance with workplace practices and environmental legislation covering disposal of industrial waste or recycled, as appropriate, following workplace procedures
6 Settle payment
  • 6.1 Invoice is issued to customer and payment received and receipted
  • 6.2 Workplace documentation is completed
No information
No information
Replaced By
State Code National Code Title Type
OBP20 MSFBA3016 Install awnings Unit of competency