Unit of competency Outline

Date retreived
23/07/2026 12:23 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Balance wheels and tyres

Balance wheels and tyres

Unit of competency
National Code
AURTTJ001
State Code
AXA71
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030503 - Vehicle Mechanics
Original Release Date
13/07/2016
Nominal Hours
10
Description
This unit describes the performance outcomes required to balance automotive wheels and tyres. It involves identifying and confirming work requirements; preparing for the work; inspecting, balancing and refitting wheel and tyre assemblies; and completing workplace processes and documentation.It applies to those working in the automotive service and repair industry. The wheels and tyres include those of agricultural machinery, heavy commercial vehicles, light vehicles, mobile plant machinery, motorcycles or trailers.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to balance wheels and tyres
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Wheel balancing information is sourced and interpreted
  • 1.3 Hazards associated with the work are identified and risks are managed
  • 1.4 Tools, equipment and materials are selected and checked for serviceability
2. Conduct wheel and tyre pre-balance inspection
  • 2.1 Wheel and tyre pre-balance inspection is carried out according to manufacturer specifications, workplace procedures and safety requirements
  • 2.2 Inspection findings are reported according to workplace procedures, including recommendations for necessary repair or replacement
3. Carry out balancing procedures
  • 3.1 Wheel balancing machine is inspected and operated according to manufacturer specifications, workplace procedures and safety requirements
  • 3.2 Wheel is balanced according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to wheel or tyre
4. Complete work processes
  • 4.1 Final inspection is made to ensure work is to workplace expectations and vehicle or wheels are presented ready for use
  • 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  • 4.3 Tools and equipment are checked and stored according to workplace procedures
  • 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF418 AURTTJ2001 Balance wheels and tyres Unit of competency
Replaced By
State Code National Code Title Type
OAK24 AURTTJ011 Balance wheels and tyres Unit of competency