Unit of competency Outline

Date retreived
22/07/2026 7:31 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Develop sustainable energy practices

Develop sustainable energy practices

Unit of competency
National Code
MSS405086
State Code
OAF52
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
22/10/2018
State Implementation and Classification
Approved Date
19/02/2019
Field of Education
039901 - Environmental Engineering
Original Release Date
19/02/2019
Nominal Hours
60
Description
This unit describes the skills and knowledge required by an individual to identify opportunities for, and make improvements in, sustainable energy practices in an organisation. This includes efficient use of raw materials, management of waste, electricity conservation, heat conservation and management, water management, environment protection and environment obligations of organisations.The unit involves analysis of energy used in processes and operations and categorising the energy use according to lean principles. The unit covers categorising energy into necessary use and muda (waste) with the muda being further categorised into necessary muda and unnecessary muda. Strategies for eliminating or minimising energy muda are covered with cost benefit analyses being required for strategies.This unit applies to a manager, technical specialist or similar who is required to use problem solving, initiative, planning and organising skills to develop plans for efficient energy use. No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1 Analyse energy use
  • 1.1 Identify all energy consuming processes
  • 1.2 Determine quantity and nature of energy consumed
  • 1.3 Analyse energy consumed and generated in different parts of the process
  • 1.4 Determine source of energy consumed in process
2 Develop energy conservation plans
  • 2.1 Determine the efficiency of use of energy by all energy consuming processes
  • 2.2 Determine causes of low efficiency of use
  • 2.3 Develop plans for increasing the efficiency of energy use
  • 2.4 Calculate cost benefit of plans
3 Develop energy trading plans
  • 3.1 Compare energy generating activities with energy consuming activities
  • 3.2 Determine feasibility of energy consuming activities using energy generated by other activities
  • 3.3 Develop plans for energy trading
  • 3.4 Calculate cost benefit of plans
4 Investigate alternative sources of energy
  • 4.1 Write a specification for energy required
  • 4.2 Identify sources for that energy
  • 4.3 Calculate cost benefit for alternative energy sources
5 Develop plans for more efficient energy use
  • 5.1 Compare cost benefit for different alternatives developed
  • 5.2 Rank proposals based on cost benefit compared to limited resources
  • 5.3 Check proposals meet regulatory requirements
  • 5.4 Recommend proposals for improving energy efficiency
6 Implement selected plans
  • 6.1 Liaise with relevant people to implement energy efficiency plans
  • 6.2 Follow through to ensure implementation occurs
  • 6.3 Monitor implementation and adjust
  • 6.4 Check new energy usage to ensure improvements have occurred
No information
No information
Replaces
State Code National Code Title Type
BAJ77 MSS405070 Develop sustainable energy practices Unit of competency
Replaced By
State Code National Code Title Type
OBV33 MSS405088 Plan, implement and monitor energy management Unit of competency