Unit of competency Outline
Date retreived
22/07/2026 4:45 AM AWST
22/07/2026 4:45 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Perform administrative processes to prepare for certification of civil aircraft maintenance
Perform administrative processes to prepare for certification of civil aircraft maintenance
Unit of competency
National Code
MEA111B
MEA111B
State Code
W8311
W8311
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
22/06/2011
Field of Education
031503 - Aircraft Maintenance Engineering
Original Release Date
22/06/2011
Nominal Hours
40
Description
This is one of the units of competency that must be attained to progress from Aircraft Maintenance Engineer to the grant of an Aircraft Maintenance Engineer Licence or Aviation Maintenance Specialist Certificate under Civil Aviation Safety Regulation (CASR) Part 66, in accordance with the licensing provisions in the Assessment Guidelines. It covers the competencies required to correctly interpret and apply CASA airworthiness and certification requirements during aircraft maintenance.The skills and knowledge covered by the units of competency at Certificate IV level listed in the Aeroskills Training Package for the qualification leading to the applicable Aircraft Maintenance Engineer Licence sought are pre-requisite to the attainment of the elements of competency specified in this unit. This includes full coverage of the Civil Aviation Safety Regulation Part 66 Avionics or Mechanical Syllabus subjects/topics listed in the Assessment Guidelines.
Notes
Elements and Performance Criteria
1. Determine the registration status of an aircraft.
- 1.1. Registration status is determined in accordance with CASR Part 47.
- 1.2. The person responsible for airworthiness and maintenance control is identified.
2. Determine eligibility to certify the completion of aircraft maintenance activities.
- 2.1. Eligibility to certify in terms of licence privileges is established in accordance with CASR Parts M, 145 and 66.
- 2.2. Eligibility to certify in terms of the Aircraft Maintenance Organisation Class/Rating is established in accordance with CASR Part 145.
3. Prepare for return of aircraft to service.
- 3.1. Completion of all scheduled and unscheduled maintenance activities is coordinated in accordance with CASR Parts M 145, 66 and the approved maintenance program.
- 3.2. The requirement for a maintenance test flight is determined.
- 3.3. Documentation is prepared for return of aircraft to service in accordance with CASR Part M and /or 145 and the approved maintenance program.
4. Compile and process maintenance documentation and reports.
- 4.1. Maintenance documentation is raised and compiled for certification.
- 4.2. Configuration management procedures are applied.
- 4.3. Maintenance related reports are compiled and processed.
- 4.4. Technical communication activities, both oral and written, are performed.
Note
Range statements listed below are numbered to facilitate specification of the assessment requirements included in the Evidence Guide.
Application
The competency applies to the certification of aircraft maintenance activities, including:
1. Scheduled maintenance
2. Unscheduled maintenance
3. Configuration changes
4. Modification incorporation
5. Repairs.
In performing Tasks 1 to 5, knowledge is to be applied with regard to airworthiness regulatory systems and Australian legislation, and the application of compliance requirements in the performance, recording and certification of maintenance activities, as follows:
6. International and national regulatory bodies and recognition agreements, including bilateral agreements
7. Australian airworthiness regulatory bodies and the legislative framework
8. The basis of airworthiness certification and determination of non-conformity
9. Procedures for release of aircraft to service following maintenance, including the determination of the requirement for a maintenance test flight
10. Procedures for certification of scheduled and unscheduled maintenance activities
11. Procedures for certification of the incorporation of modifications
12. Procedures for certifying the completion of repairs
13. Determining and applying configuration management procedures, including the weighing of aircraft and the determination of the centre of gravity
14. Compiling and processing service difficulty reports
15. Compiling and processing technical investigation reports
16. Compiling and processing condition reports
17. Orally communicating on technical and airworthiness compliance topics
18. Communicating in writing on technical and airworthiness compliance issues.
Range statements listed below are numbered to facilitate specification of the assessment requirements included in the Evidence Guide.
Application
The competency applies to the certification of aircraft maintenance activities, including:
1. Scheduled maintenance
2. Unscheduled maintenance
3. Configuration changes
4. Modification incorporation
5. Repairs.
In performing Tasks 1 to 5, knowledge is to be applied with regard to airworthiness regulatory systems and Australian legislation, and the application of compliance requirements in the performance, recording and certification of maintenance activities, as follows:
6. International and national regulatory bodies and recognition agreements, including bilateral agreements
7. Australian airworthiness regulatory bodies and the legislative framework
8. The basis of airworthiness certification and determination of non-conformity
9. Procedures for release of aircraft to service following maintenance, including the determination of the requirement for a maintenance test flight
10. Procedures for certification of scheduled and unscheduled maintenance activities
11. Procedures for certification of the incorporation of modifications
12. Procedures for certifying the completion of repairs
13. Determining and applying configuration management procedures, including the weighing of aircraft and the determination of the centre of gravity
14. Compiling and processing service difficulty reports
15. Compiling and processing technical investigation reports
16. Compiling and processing condition reports
17. Orally communicating on technical and airworthiness compliance topics
18. Communicating in writing on technical and airworthiness compliance issues.
Overview of assessment
A person who demonstrates competency in this unit must be able to apply without error legislative and regulatory requirements relating to the certification of aviation maintenance.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
It is essential that airworthiness compliance requirements are interpreted and fully applied without error.
Evidence is required of underlying knowledge and skills associated with the application of airworthiness legislation and compliance requirements, along with evidence of appropriate levels of literacy and oral expression associated with presenting clear and concise information.
A person cannot be assessed as competent until it can be demonstrated to the satisfaction of the workplace assessor that the relevant elements of the unit of competency are being achieved under supervision without intervention on a range of tasks fully representative of Groups 1 to 18 in the Range Statement. The body of evidence for this unit may be collected and logged during simulated activities at the CASR Part 147 MTO and/or performance during supervised workplace activities such as Practical Consolidation of Training (PCT) assessments.
Knowledge must also be demonstrated of the concept of airworthiness that underpins the legislative framework and compliance requirements.
Context of and specific resources for assessment
Competency should be assessed in the work environment under supervision but without intervention for the purpose of Journal entries, and/or by use of simulated activities in a CASR Part 147 Maintenance Training Organisation (MTO), covering the interpretation and application of airworthiness control and certification requirements.
Method of assessment
This unit must be linked in its assessment and application to those that apply to the exercise of Aircraft Maintenance Engineer Licence or Aviation Maintenance Specialist privileges in the actual maintenance of aircraft.
Guidance information for assessment
A person who demonstrates competency in this unit must be able to apply without error legislative and regulatory requirements relating to the certification of aviation maintenance.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
It is essential that airworthiness compliance requirements are interpreted and fully applied without error.
Evidence is required of underlying knowledge and skills associated with the application of airworthiness legislation and compliance requirements, along with evidence of appropriate levels of literacy and oral expression associated with presenting clear and concise information.
A person cannot be assessed as competent until it can be demonstrated to the satisfaction of the workplace assessor that the relevant elements of the unit of competency are being achieved under supervision without intervention on a range of tasks fully representative of Groups 1 to 18 in the Range Statement. The body of evidence for this unit may be collected and logged during simulated activities at the CASR Part 147 MTO and/or performance during supervised workplace activities such as Practical Consolidation of Training (PCT) assessments.
Knowledge must also be demonstrated of the concept of airworthiness that underpins the legislative framework and compliance requirements.
Context of and specific resources for assessment
Competency should be assessed in the work environment under supervision but without intervention for the purpose of Journal entries, and/or by use of simulated activities in a CASR Part 147 Maintenance Training Organisation (MTO), covering the interpretation and application of airworthiness control and certification requirements.
Method of assessment
This unit must be linked in its assessment and application to those that apply to the exercise of Aircraft Maintenance Engineer Licence or Aviation Maintenance Specialist privileges in the actual maintenance of aircraft.
Guidance information for assessment
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WC025 | MEA111C | Perform administrative processes to prepare for certification of civil aircraft maintenance | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| S753 | MEA50110 | Diploma of Aeroskills (Avionics) | Qualification |
| W495 | MEA50107 | Diploma of Aeroskills (Avionics) | Qualification |
| S754 | MEA50210 | Diploma of Aeroskills (Mechanical) | Qualification |
| W496 | MEA50207 | Diploma of Aeroskills (Mechanical) | Qualification |