Unit of competency Outline

Date retreived
22/07/2026 10:34 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Set up machine for basic rotary die cutting or embossing

Set up machine for basic rotary die cutting or embossing

Unit of competency
National Code
ICPCBF2270
State Code
OBP32
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
06/05/2020
View on TGA
State Implementation and Classification
Approved Date
20/08/2020
Field of Education
030103 - Printing
Original Release Date
20/08/2020
Nominal Hours
30
Description
This unit describes the skills and knowledge required to set up a machine for basic rotary die cutting or embossing.It applies to individuals in the printing and graphic arts industry who set up machines for basic rotary die cutting or embossing to meet production requirements. They generally work under direct supervision.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare job
  • 1.1 Read and interpret job specifications from job documentation and production control system
  • 1.2 Identify and undertake machine requirements for set-up
  • 1.3 Check availability of all job related components
2. Mount rotary cutting and embossing devices
  • 2.1 Select cutting devices and dies and secure to machine according to job specifications
  • 2.2 Register and proof cutting devices and dies
  • 2.3 Mount cutting devices and dies
3. Set up reel system
  • 3.1 Set up and adjust unwind and rewind reels according to job specifications
  • 3.2 Carry out webbing procedures
  • 3.3 Set up and adjust web control system
  • 3.4 Slice and join reels
  • 3.5 Set up and adjust folder and sheeter
4. Set up sheet system
  • 4.1 Set up and adjust feeder and delivery systems
  • 4.2 Prepare and adjust sheet pick-up and transportation system
  • 4.3 Set up and adjust transfer systems
  • 4.4 Remove substrate from process
5. Set up machine for basic rotary cutting
  • 5.1 Set up and adjust rotary cutting devices
  • 5.2 Prepare and adjust cutting pressures
  • 5.3 Set counter knives and anvils in required position
6. Set up in-line units
  • 6.1 Set up and adjust minor in-line printing, converting and binding units for basic processes according to machine requirements
  • 6.2 Assist with the set-up of major in-line printing, converting and binding units
7. Conduct sample run
  • 7.1 Prepare material to be used for sample run
  • 7.2 Set up and operate machine to produce a specified sample according to work health and safety (WHS) requirements, manufacturer specifications and enterprise procedures
  • 7.3 Inspect sample and identify requirements for and organise testing according to enterprise procedures
  • 7.4 Interpret results to determine adjustment requirements
  • 7.5 Carry out adjustments according to product and machine specifications
No information
No information
Replaces
State Code National Code Title Type
AUP42 ICPCBF227 Set up machine for basic rotary die cutting or embossing Unit of competency